{"title":"RockSolid Series","description":"\u003cp\u003eOur toughest collection of plate steel bumpers made from 3\/16 and 1\/4\" plate steel designed to keep your truck protected from dangers all around.\u003c\/p\u003e","products":[{"product_id":"1966-1977-bronco-rocksolid-front-bumper-with-push-bar","title":"1966-1977 Bronco Bumper RockSolid Front with Push Bar (PF300)","description":"\u003cp\u003eThis classy front bumper offers full front end and fender protection with great approach angles. It is made from ¼” CNC cut plate steel, it's winch ready and is an easy bolt on installation.\u003c\/p\u003e\n\u003cp\u003eThe RockSolid bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. It will add protection and style to our classic RockSolid look. This bumper will fit almost any winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".\u003c\/p\u003e\n\u003cp\u003eEasy bolt-on installation with no welding required however you will need to drill four 7\/16\" holes\u003cstrong\u003e IN YOUR BUMPER \u003c\/strong\u003eto install, so please test fit the bumper to the truck before you apply paint or powder coat so that you can drill the appropriate holes. You will use the holes in the front of your Bronco Frame as the mark for where the holes should be drilled. Drill a hole in the top and bottom of each side of the bumper frame mount.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 14.0pt; line-height: 107%;\"\u003ePush Bar Styles\u003c\/span\u003e\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Bull Bar\u003c\/strong\u003e: A single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003ePre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 14.0pt; line-height: 107%;\"\u003eEdition\u003c\/span\u003e\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eTack Kit:\u003c\/strong\u003e A tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: This bumper is not offered with a body lift option. You can still run this bumper if you have a body lift, the extra spacers are not needed due to the engineering of the bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit \/ Pre-Runner Bar","offer_id":49250698658078,"sku":"PF300-K-PR","price":659.66,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ Bull Bar","offer_id":49261665550622,"sku":"PF300-K-BB","price":659.66,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Pre-Runner Bar","offer_id":49250698690846,"sku":"PF300-PR","price":732.95,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Bull Bar","offer_id":49261665616158,"sku":"PF300-BB","price":732.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-Bumper-RockSolid-Front-with-Push-Bar-_PF300_-ProtoFab-10420576.jpg?v=1760482160"},{"product_id":"1966-1977-bronco-rocksolid-rear-bumper","title":"66-77 Bronco Rear Bumper | RockSolid Series","description":"\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis sleek early Bronco bumper is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes** cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.***\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. All other editions require several hours of welding and grinding. Additionally, if you order with a body lift, you will have two holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*** This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline; color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eSpare Tire Carrier: \u003c\/strong\u003eAdd a spare tire carrier to your bumper and get it off that Quarter panel! The rack is able to hold 37\" tire with 5.25\" back spacing (differing back spacing will need wheel spacers). Made of 2\"x3\" x 0.188 wall rectangular tube with a 3\/4\" pivot and 2  permanently lubricated 3\/4\" heims rated at 15,850 lbs of static radial load. Comes with Cam latch mechanism and Rack Lockout system.\u003c\/p\u003e\n\u003ctable style=\"height: 70px; width: 99.679%;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"height: 19.6px; width: 100%;\"\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e A rack that puts the spare tire on the passenger side similar to factory location.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"height: 55.2px; width: 100%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eCentered: \u003c\/strong\u003e A rack that puts the spare tire in the center of the tailgate with a lowered wheel plate for added visibility.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Can Carrier: \u003c\/strong\u003eAdd a fuel can rack to your bumper.\u003c\/p\u003e\n\u003ctable style=\"height: 98px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eSingle\/Double Can:\u003c\/strong\u003e An additional rack added on the driver's side. Made of 2\"x3\" x 0.188 wall rectangular tube with 3\/4\" pivot and 2 permanently lubricated 3\/4\" heims rated at 15,850 lbs of static radial load. Comes with Cam latch mechanism and Rack Lockout system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"height: 39.2px;\"\u003e\n\u003cstrong\u003eRotoPax Mount:\u003c\/strong\u003e Available for our Centered Tire rack. Mounts a 4gal RotoPax to the back side of the Tire Carrier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216987230494,"sku":"PF302-BK","price":400.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49250702590238,"sku":"PF302-K","price":450.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49250702721310,"sku":"PF302","price":595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Rear-Bumper-_-RockSolid-Series-ProtoFab-10420672.jpg?v=1760482161"},{"product_id":"1966-1977-bronco-rocksolid-flat-top-front-bumper","title":"66-77 Bronco Front Winch Bumper | RockSolid Series (PF301)","description":"\u003cp\u003eThis classy early bronco bumper offers full front end and fender protection with great approach angles. It is made from ¼” plate steel, it's winch ready and is an easy bolt on installation.\u003c\/p\u003e\n\u003cp\u003eThe RockSolid™ Bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This very durable and modern design has multiple built in tow points or add a set of ‘D’ ring tabs for the ultimate tow points. \u0026gt;This bumper will fit almost any winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".\u003c\/p\u003e\n\u003cp\u003eEasy bolt-on installation with no welding required however you will need to drill four 7\/16\" holes \u003cstrong\u003eIN YOUR BUMPER\u003c\/strong\u003e to install, so please test fit the bumper to the truck before you apply paint or powder coat so that you can drill the appropriate hole. You will use the holes in the front of your Bronco Frame as the mark for where the holes should be drilled. Drill a hole in the top and bottom of each side of the bumper frame mount.\u003c\/p\u003e\n\u003ch6\u003e*This statement applied to the fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePush Bar: \u003c\/strong\u003eAdd a push bar to your front bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 98px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top (No Bar): \u003c\/strong\u003eJust like it sounds. This option means there is no push bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"height: 39.2px;\"\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: This bumper is not offered with a body lift option. You can still run this bumper if you have a body lift, the extra spacers are not needed due to the engineering of the bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216929132830,"sku":"PF301-BK","price":632.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49250703245598,"sku":"PF301-K","price":732.0,"currency_code":"USD","in_stock":true},{"title":"Completely Welded","offer_id":49250703278366,"sku":"PF301","price":745.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Front-Winch-Bumper-_-RockSolid-Series-_PF301_-ProtoFab-10421463.jpg?v=1760482169"},{"product_id":"1966-1977-bronco-rocksolid-single-rack-rear-bumper","title":"66-77 Bronco Spare Tire Rear Bumper | Single Rack | RockSolid Series (PF303)","description":"\u003cp\u003eThis sleek early Bronco bumper is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes*\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. This rack is made of 2\" x 3\" x 0.188 wall rectangular tube. The hinge uses two 3\/4\" permanently lubricated heim joints to open the rack. This ensures a smooth and easy hinge to maintain. Included with this rugged rack is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cb\u003e.**\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, If you order a body lift, there may be a couple holes you have to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e***This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable width=\"100%\" style=\"height: 196px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Body Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8-Lug Wheel Plate\u003c\/strong\u003e: If your truck has Super Duty axles under it, you need to order the appropriate wheel plate. Choose from 8x6.5\" or 8x170mm.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216765620510,"sku":"PF303-BK","price":800.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49250706850078,"sku":"PF303-K","price":900.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49250706882846,"sku":"PF303","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Spare-Tire-Rear-Bumper-_-Single-Rack-_-RockSolid-Series-_PF303_-ProtoFab-10423049.jpg?v=1760482181"},{"product_id":"1966-1977-bronco-rocksolid-double-rack-rear-bumper","title":"66-77 Bronco Spare Tire and Gas Can Rear Bumper | Double Rack | RockSolid Series (PF304)","description":"\u003cp\u003e66-77 Bronco Spare Tire and Gas Can Rear Bumper, also called the Double Rack, is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" back spacing and a 2\u003csup\u003end\u003c\/sup\u003e rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) however you can upgrade the basket to hold two cans.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese racks are made of 2\"x3\" x 0.188 wall rectangular tube. The hinges use two 3\/4\" permanently lubricated heim joints to open the racks. This ensures a smooth and easy hinge to maintain. Included with these rugged racks are two of our coveted Cam latch mechanisms which are adjustable and offer many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e***\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, if you order a body lift, you will have a few holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*** This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable width=\"100%\" style=\"height: 196px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e8-Lug Wheel Plate: \u003c\/strong\u003eIf your Bronco has Super Duty Axles you need to order the appropriate wheel plate. Choose from 8 x 6.5\" or 8 x 170mm.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eUpgraded Fuel Storage Capacity: \u003c\/strong\u003eExpand the basket to make room for 2 NATO cans instead of just one.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216735703326,"sku":"PF304-BK","price":1100.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49259014029598,"sku":"PF304-K","price":1400.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49259014127902,"sku":"PF304","price":1795.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Spare-Tire-and-Gas-Can-Rear-Bumper-_-Double-Rack-_-RockSolid-Series-_PF304_-ProtoFab-10425073.jpg?v=1760482197"},{"product_id":"1978-1979-bronco-rocksolid™-flat-top-front-bumper","title":"1978-1979 Bronco RockSolid™ Flat Top Front Bumper (PF501)","description":"\u003cp\u003eThis bumper is made completely of CNC Cut 1\/4'' Plate steel and is winch ready. It will fit most low profile winches with the standard 10 x 4.5\" bolt pattern. The RockSolid Bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching.\u003c\/p\u003e\n\u003cp\u003eThis very durable and modern design comes tow hook ready or add a set of ‘D’ ring mounts for the ultimate tow points. Easy bolt-on installation only requires 4 holes to be drilled with no welding required. You will have to notch the bumper or cut the front fenders in order for this bumper to fit properly.  Ships raw steel via truck freight.  \u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit \/ 1\/4\" Plate Steel","offer_id":49250708226334,"sku":"PF501-K-025","price":1140.51,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ 3\/16\" Plate Steel","offer_id":49261810254110,"sku":"PF501-K-01875","price":1049.56,"currency_code":"USD","in_stock":true},{"title":"Welded \/ 1\/4\" Plate Steel","offer_id":49250708160798,"sku":"PF501-025","price":1341.78,"currency_code":"USD","in_stock":true},{"title":"Welded \/ 3\/16\" Plate Steel","offer_id":49261810221342,"sku":"PF501-01875","price":1234.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1978-1979-Bronco-RockSolidTM-Flat-Top-Front-Bumper-_PF501_-ProtoFab-10425531.jpg?v=1760482199"},{"product_id":"1966-1977-bronco-rocksolid-triple-rack-rear-bumper","title":"1966-1977 Bronco RockSolid Triple Rack Rear Bumper (PF305)","description":"\u003cp\u003e66-77 Bronco Spare Tire and Gas Can and Cooler Basket Rear Bumper, also called the Triple Rack, is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" back spacing and a 2\u003csup\u003end\u003c\/sup\u003e rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) AND a 16\" x 24\" Cooler Basket.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese racks are made of 2\"x3\" x 0.188 wall rectangular tube. The hinges use two 3\/4\" permanently lubricated heim joints to open the racks. This ensures a smooth and easy hinge to maintain. Included with these rugged racks are two of our coveted Cam latch mechanisms which are adjustable and offer many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e***\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, if you order a body lift, you will have a few holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*** This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e8-Lug Wheel Plate: \u003c\/strong\u003eIf your Bronco has Super Duty Axles you need to order the appropriate wheel plate. Choose from 8 x 6.5\" or 8 x 170mm.\u003c\/p\u003e\n\u003ch3\u003eLooking for a cooler that will fit our cooler basket?\u003c\/h3\u003e\n\u003cp\u003eWe recommend:\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003ca href=\"https:\/\/canyoncoolers.com\/products\/outfitter-35?variant=8934184190009\" title=\"Canyon Outfiter 35 Qt Cooler\" rel=\"noopener\" target=\"_blank\"\u003eCanyon Outfitter 35 Qt\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003ca href=\"https:\/\/www.igloocoolers.com\/products\/bmx-52-qt-cooler?variant=32300957368403\" title=\"Igloo BMX 53 Qt Cooler\" rel=\"noopener\" target=\"_blank\"\u003eIgloo BMX 52 Qt\u003c\/a\u003e\u003c\/p\u003e\n\u003cul class=\"descrip\"\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216838693150,"sku":"PF305-BK","price":1704.51,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49250708324638,"sku":"PF305-K","price":1704.51,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49250708357406,"sku":"PF305","price":2265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-RockSolid-Triple-Rack-Rear-Bumper-_PF305_-ProtoFab-10426072.jpg?v=1760482208"},{"product_id":"1978-1979-bronco-rocksolid™-rear-bumper","title":"1978-1979 Bronco RockSolid Rear Bumper (PF502)","description":"\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your full size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and also has Hi-Lift Jack access holes*\u003cspan\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWith its easy bolt-on installation that requires no welding or drilling**, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250698723614,"sku":"PF502-K","price":702.19,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250698756382,"sku":"PF502","price":936.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/pf502_78-79_rsr_no_rack.jpg?v=1759847169"},{"product_id":"1978-1979-bronco-rocksolid™-front-bumper-with-push-bar","title":"78-79 Bronco Front Winch Bumper | ProtoFab RockSolid Series (PF500)","description":"\u003cp\u003eFront Winch Bumper in our RockSolid Series is a favorite among full size Bronco owners. This full size Bronco front winch bumper offers full front end and fender protection with great approach angles. It is made from ¼” or 3\/16\" plate steel, is winch ready and is an easy bolt on installation.*\u003c\/p\u003e\n\u003cp\u003eThe RockSolid bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This bumper will fit \u003cspan style=\"text-decoration: underline;\"\u003ealmost any\u003c\/span\u003e winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".** \u003c\/p\u003e\n\u003ch6\u003e*This statement applies to the Fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch6\u003e**We have been told some very light trimming had to be done to the lip of the bumper's winch cavity for a customer who had a SmityBilt Gen 2 X2O Winch.\u003c\/h6\u003e\n\u003ch4\u003eEdition\u003c\/h4\u003e\n\u003ctable width=\"100%\" style=\"height: 196px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. \u003cspan style=\"color: rgb(234, 38, 15);\"\u003eThe lead time for this product is significantly less. (Typically a 4-8 week lead time)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Welded Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eCompletely Welded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003eGrille Protection\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top: \u003c\/strong\u003eNo push bar, just a nice clean surface.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003eYou will have to notch the bumper or cut the front fenders in order for this bumper to fit properly.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789606228254,"sku":null,"price":856.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789606261022,"sku":null,"price":749.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":50789606359326,"sku":null,"price":936.25,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789606392094,"sku":null,"price":829.25,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":50789606293790,"sku":null,"price":989.75,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789606326558,"sku":null,"price":882.75,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789606424862,"sku":null,"price":1043.25,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789606457630,"sku":null,"price":936.25,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49250708521246,"sku":"PF500-K-025-BB","price":1123.5,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789606523166,"sku":null,"price":1016.5,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49261883785502,"sku":"PF500-K-025-PR","price":1177.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789606490398,"sku":null,"price":1070.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789606555934,"sku":null,"price":1337.5,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789606588702,"sku":null,"price":1230.5,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49250708586782,"sku":"PF500-025-BB","price":1417.75,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789606654238,"sku":null,"price":1310.75,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49250708455710,"sku":"PF500-025-PR","price":1471.25,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789606621470,"sku":null,"price":1364.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1978-1979-Bronco-RockSolidTM-Front-Bumper-with-Push-Bar-_PF500_-ProtoFab-10428321.jpg?v=1760482218"},{"product_id":"1978-1979-bronco-rocksolid-single-rack-rear-bumper","title":"1978-1979 Bronco RockSolid Single Rack Rear Bumper (PF503)","description":"\u003cp class=\"MsoNormal\"\u003eThis sleek bumper is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling\u003cstrong\u003e*\u003c\/strong\u003e, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes\u003cstrong\u003e*\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e*\u003c\/strong\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. This rack is made of 2\" x 3\" x 0.188 wall rectangular tube. The hinge uses two 3\/4\" permanently lubricated heim joints to open the rack. This ensures a smooth and easy hinge to maintain. Included with this rugged rack is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2”\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cspan\u003e\u003cb\u003e.***\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, If you order a body lift, there may be a couple holes you have to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan\u003e***This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch4\u003eEdition\u003c\/h4\u003e\n\u003cp\u003e\u003cstrong\u003eTack Kit:\u003c\/strong\u003e A tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWelded\u003c\/strong\u003e: Arrives as unfinished raw-steel ready to install. We ALWAYS recommend test-fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"text-decoration: underline;\"\u003eXLT \/ Eddie Bauer Models\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003eIf you run into an issue with the tailgate trim hitting the cam bail when the tailgate is open, you can run a new cable stop (approx 17\") on your tailgate.  Otherwise, you will have to notch the trim.\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"text-decoration: underline;\"\u003eMounting to F-Series Trucks\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003eThere have been several people who have successfully put these bumpers on pickup trucks. Please keep in mind that these bumpers are made for the Ford Bronco and the stock axles they come with. These bumpers will fit on F-Series pickups however the frame is not the same, and sometimes the bolt pattern for the spare tire will be different. Mounting the rear bumper to a pickup truck is possible, however it may require moderate to heavy modification to install the bumper properly.  You will have to order the correct wheel plate to make the spare tire fit. 8 lug wheel plates are an additional $45. The frame mounts will also need to be ordered unwelded and you will need to modify\/create a custom bracket for mounting. We DO NOT recommend putting these bumpers on pickup trucks unless you have an experienced fabricator contracted for the job. We DO NOT provide installation assistance in this case.\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBumper Dimensions\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003eInterior dimension between two side wings is 76\". \u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"text-decoration: underline;\"\u003eStandardized Bumper Changes\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003eOrders placed before 06\/16\/2025 will come WITH an unrated receiver and the 5\/8\" pivot system unless ordered otherwise. They did not come with the rack lockout system unless ordered that way specifically.\u003c\/h6\u003e\n\u003ch6\u003eOrders placed between 06\/16\/2025 and 09\/31\/2025 automatically came with a 3\/4\" pivot system and the branded pivot brace as well as the rack lockout system at no additional charge. If you desire a receiver, you need to add the receiver to the bumper for an added charge.  \u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003eOrders placed on or after 10\/01\/2025 come WITH an unrated receiver, a 3\/4\" pivot system with PF branded pivot brace as well as the rack lockout system.\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Kit","offer_id":49250708652318,"sku":"PF503-K","price":1162.82,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250708685086,"sku":"PF503","price":1550.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1978-1979-Bronco-RockSolid-Single-Rack-Rear-Bumper-_PF503_-ProtoFab-10428797.jpg?v=1760482229"},{"product_id":"1966-1977-bronco-rocksolid-lowpro-front-bumper","title":"66-77 Bronco Hidden Winch Front Bumper | LowPro | RockSolid Series (PF307)","description":"\u003cp\u003eThe 66-77 Bronco Hidden Winch Front Bumper, also called The LowPro, is a favorite among classic bronco owners. This Bronco bumper is made completely of 3\/16'' Plate steel and is winch ready. Easy bolt-on installation with no welding or drilling required.*\u003c\/p\u003e\n\u003cp\u003eThe RockSolid™ Bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This very durable and modern design has multiple built in tow points or add a set of ‘D’ ring tabs for the ultimate tow points.\u003c\/p\u003e\n\u003ch6\u003e*This statement applied to the fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePush Bar: \u003c\/strong\u003eAdd a push bar to your front bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"height: 98px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top (No Bar): \u003c\/strong\u003eJust like it sounds. This option means there is no push bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"height: 39.2px;\"\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Body Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSuggested winches\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe bumper's interior is 7.25\" tall and utilizes the standard winch mount bolt pattern of 10\" x 4.5\". The winches that fit in this bumper are \u003cstrong\u003every limited\u003c\/strong\u003e and are a tight fit, but the following we know will fit without issue: Warn M8 and Warn VR Evo*. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarn M8\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack will need to be relocated to fit in this bumper. We suggest putting the winch pack under the hood to help keep it protected from the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarn VR Evo 8k, 10k and 12k \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack and the cover above the cable spool will need to be removed for this to fit in this bumper. It is a tight fit, but should definitely fit. These winches have been successfully installed numerous times in this bumper. We recommend relocating the winch pack under the hood to help protect it from the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOther Winches\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe SmittyBilt Gen2 XRC 9.5 or 12k (The XRC Gen3 will not fit) and SmittyBilt X20 Gen2 have not been tested but based on manufacturer specified height, it is POSSIBLY a suitable fit for this bumper. We cannot guarantee the fit of these products in this bumper so please test fit\u003cem\u003e right away\u003c\/em\u003e in case you need to send anything back.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit \/ The Flat Top (No Bar)","offer_id":50216719548702,"sku":"PF307-BK","price":475.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar","offer_id":50216719581470,"sku":"PF307-BK-BB","price":525.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner Bar","offer_id":50216719614238,"sku":"PF307-BK-PR","price":525.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Flat Top (No Bar)","offer_id":49250708717854,"sku":"PF307-K","price":548.25,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Bull Bar","offer_id":50212839457054,"sku":"PF307-K-BB","price":633.25,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Pre-Runner Bar","offer_id":50212839489822,"sku":"PF307-K-PR","price":633.25,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top (No Bar)","offer_id":49250708783390,"sku":"PF307","price":645.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar","offer_id":50212839522590,"sku":"PF307-BB","price":745.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner Bar","offer_id":50212839555358,"sku":"PF307-PR","price":745.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Hidden-Winch-Front-Bumper-_-LowPro-_-RockSolid-Series-_PF307_-ProtoFab-10430470.jpg?v=1760482235"},{"product_id":"1980-1996-bronco-rocksolid-double-rack-rear-bumper","title":"1980-96 Bronco Double Rack | ProtoFab RockSolid Series","description":"\u003ch3\u003eFinally, a full size Bronco bumper with fuel carrier.\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHave you been looking for a bumper that not only gets the spare tire off the body of your Bronco but also has a fuel carrier? This is the bumper for you!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your full size Bronco. The design wraps around the rear corners to provide our quality protection. With no welding or drilling required, it is quick and simple to install.** This bumper has not one, but two removable swing out racks. One for your spare tire and the other for either one or two NATO cans. This bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" backspacing. (If you are running a wheel with a larger backspacing, you will need to use wheel spacers.)\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese racks are made of 2\" x 3\" x 0.188 wall rectangular tube. Each hinge uses two 3\/4\" permanently lubricated heim joints to open the rack. This ensures a smooth and easy hinge to maintain. Included with each of these rugged racks is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” unrated receiver hitch which is capable of pulling the stock recommended weight for your Bronco.*** \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIt’s clear to see what makes our bumper system the best system you can equip your Bronco with! This full size Bronco bumper with fuel carrier is exactly what you need to make your next trip a smashing success.\u003cb\u003e\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003e1980-1996 Bronco Bumper\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e2 removeable swing out racks\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e2 Lockout Mechanisms\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eUnrated 2\" Receiver \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003eHardware does not come with this product due to personal preference of hardware grade. You will need to source: (6) 5\/8” x 1½” Hex head bolts, (6) 5\/8” Nuts (preferably nylons however standard nuts will suffice with use of lock washers), (12) 5\/8” Flat washers, (6) 5\/8” Lock Washers (only if not using nylon nuts)\u003c\/blockquote\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":60705577468190,"sku":null,"price":1200.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49250708848926,"sku":"PF842-K","price":1400.0,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250708881694,"sku":"PF842","price":1750.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/80-96-Bronco-Double-Rack-_-ProtoFab-RockSolid-Series-_PF842_-ProtoFab-768264254.jpg?v=1794061845"},{"product_id":"1980-1996-bronco-rocksolid™-single-rack-rear-bumper-pf817","title":"1980-1996 Bronco RockSolid Single Rack Rear Bumper (PF841)","description":"\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your classic full-size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and has Hi-Lift Jack access holes* cut into the bottom area, should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWith its easy bolt-on installation that requires no welding or drilling**, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. \u003c\/p\u003e\n\u003ch6\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Kit","offer_id":49250708914462,"sku":"PF841-K","price":1219.8,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250708947230,"sku":"PF841","price":1524.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Full-Size-Bronco-Rear-Bumper-_-RockSolid-_PF840_-ProtoFab-332557883.png?v=1763065482"},{"product_id":"92-96-bronco-front-winch-bumper-rocksolid-series-pf820","title":"92-96 Bronco Front Winch Bumper | RockSolid Series (PF820)","description":"\u003cp\u003eThe 92-96 Bronco Front Winch Bumper in our RockSolid Series is a favorite among full size Bronco owners. This full size Bronco front winch bumper offers full front end and fender protection with great approach angles. It is made from ¼” or 3\/16\" plate steel, is winch ready and is an easy bolt on installation.*\u003c\/p\u003e\n\u003cp\u003eThe RockSolid bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This bumper will fit \u003cspan style=\"text-decoration: underline;\"\u003ealmost any\u003c\/span\u003e winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".** \u003c\/p\u003e\n\u003ch6\u003e*This statement applies to the Fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch6\u003e**We have been told some very light trimming had to be done to the lip of the bumper's winch cavity for a customer who had a SmityBilt Gen 2 X2O Winch.\u003c\/h6\u003e\n\u003ch4\u003eEdition\u003c\/h4\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. \u003cspan style=\"color: rgb(234, 38, 15);\"\u003eThe lead time for this product is significantly less. (Typically a 4-8 week lead time)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Welded Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eCompletely Welded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003eGrille Protection\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top: \u003c\/strong\u003eNo push bar, just a nice clean surface.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003eF250\/350 Trucks: This will fit on your truck however you may have to do some minor drilling where existing rivets are and replace those rivets with grade 8 hardware. For any questions, please reach out so we can assess your exact situation.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50216687993118,"sku":"PF820-BK-025","price":896.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50453144174878,"sku":null,"price":796.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":50216688025886,"sku":"PF820-BK-025-BB","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50453144207646,"sku":"PF820-BK-01875-BB","price":896.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":50216688058654,"sku":"PF820-BK-025-PR","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50453144240414,"sku":"PF820-BK-01875-PR","price":896.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50212932682014,"sku":"PF820-K-025","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50453144273182,"sku":"PF820-K-01875","price":896.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49250699247902,"sku":"PF820-K-025-BB","price":1096.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50453144305950,"sku":"PF820-K-01875-BB","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49250699313438,"sku":"PF820-K-025-PR","price":1096.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50453144338718,"sku":"PF820-K-01875-PR","price":996.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50212932714782,"sku":"PF820-025","price":1245.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50453144371486,"sku":null,"price":1145.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49250699378974,"sku":"PF820-025-BB","price":1345.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50453144404254,"sku":"PF820-01875-BB","price":1245.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49250699444510,"sku":"PF820-025-PR","price":1345.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50453144437022,"sku":"PF820-01875-PR","price":1245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/92-96-Bronco-Front-Winch-Bumper-_-RockSolid-Series-_PF820_-ProtoFab-10435459.jpg?v=1760482296"},{"product_id":"1966-1977-bronco-rocksolid-non-winch-front-bumper-with-push-bar","title":"1966-1977 Bronco RockSolid Non-Winch Front Bumper with Push Bar (PF309)","description":"\u003cp\u003eThis bumper is made of 3\/16'' Plate steel and is NOT winch ready. (For our winch ready option, see product number \u003ca href=\"\/products\/1966-1977-bronco-rocksolid-front-bumper-with-push-bar\"\u003ePF300\u003c\/a\u003e.) The RockSolid™ bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. The pre-runner style push bar is made from 2\" round tube with 1 1\/4\" side braces. It will add protection and style to the classic RockSolid look.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThis very durable and modern design has multiple built in tow points or add a set of ‘D’ ring mounts for the ultimate tow points. Easy bolt-on installation with no drilling or welding required. Ships raw steel via truck freight. This product is also available in kit form. The kit edition is not a flat kit and will not be more economical when shipping. It arrives on a pallet; tack welded in its true form and will require several hours welding and grinding to complete.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eA body lift option is available for this product. If you have a body lift, this option will prevent gaps between your bumper, which is mounted to the frame, and your truck body.\u003c\/p\u003e\n","brand":"ProtoFab","offers":[{"title":"Kit","offer_id":49265056088350,"sku":"PF309-K","price":611.51,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49265056121118,"sku":"PF309","price":679.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-RockSolid-Non-Winch-Front-Bumper-with-Push-Bar-_PF309_-ProtoFab-10446298.jpg?v=1760482370"},{"product_id":"1966-1977-bronco-rocksolid-non-winch-front-bumper","title":"1966-77 Bronco Non-Winch Front Bumper | ProtoFab RockSolid Series","description":"\u003cp\u003eThis early Bronco bumper is made of 3\/16'' Plate steel and is NOT winch ready. (For our winch ready option, see product number \u003ca href=\"\/products\/1966-1977-bronco-rocksolid-flat-top-front-bumper\" title=\"PF301\" rel=\"noopener\" target=\"_blank\"\u003ePF301\u003c\/a\u003e.) The RockSolid™ bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eEasy bolt-on installation with no drilling or welding required. A body lift option is available for this product. If you have a body lift, this option will prevent gaps between your bumper, which is mounted to the frame, and your truck body.\u003c\/p\u003e\n","brand":"ProtoFab","offers":[{"title":"Box Kit \/ The Flat Top","offer_id":60895501189406,"sku":"PF310-BK","price":450.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar","offer_id":60895501222174,"sku":"PF310-BK-BB","price":510.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner","offer_id":60895501254942,"sku":"PF310-BK-PR","price":530.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Flat Top","offer_id":49250700394782,"sku":"PF310-K","price":500.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Bull Bar","offer_id":60895501287710,"sku":"PF310-K-BB","price":560.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Pre-Runner","offer_id":60895501320478,"sku":"PF310-K-PR","price":580.0,"currency_code":"USD","in_stock":true},{"title":"Welded \/ The Flat Top","offer_id":49250700525854,"sku":"PF310-W","price":600.0,"currency_code":"USD","in_stock":true},{"title":"Welded \/ The Bull Bar","offer_id":60895501353246,"sku":"PF310-W-BB","price":660.0,"currency_code":"USD","in_stock":true},{"title":"Welded \/ The Pre-Runner","offer_id":60895501386014,"sku":"PF310-W-PR","price":680.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-Bumper-RockSolid-Non-Winch-Flat-Top-Front-_PF310_-ProtoFab-10446759.jpg?v=1760482379"},{"product_id":"1980-1996-bronco-rocksolid-centered-single-rack-rear-bumper","title":"1980-1996 Bronco RockSolid™ Centered Single Rack Rear Bumper (PF841C)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your full size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and also has Hi-Lift Jack access holes* \u003c\/span\u003e\u003cspan\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation. With its easy bolt-on installation that requires no welding or drilling**, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper includes our new unique rack which puts the tire in the center of the tailgate but we also lowered it for added visibility while still being able to accept up to a 37\" spare tire with 5.25\" backspacing. (If you are running a wheel with a larger backspacing, you will need to use wheel spacers.)\u003c\/p\u003e\n\u003ch6\u003e*These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan\u003e**This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, If you order a body lift, there may be a couple holes you have to drill.\u003c\/span\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250701738270,"sku":"PF841C-K","price":1323.32,"currency_code":"USD","in_stock":true},{"title":"Completely Welded","offer_id":49250701771038,"sku":"PF841C","price":1764.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Bronco-RockSolidTM-Centered-Single-Rack-Rear-Bumper-_PF841C_-ProtoFab-10464538.jpg?v=1760482478"},{"product_id":"1980-1996-bronco-rocksolid-centered-tire-and-nato-can-rear-bumper","title":"1980-1996 Bronco RockSolid Centered Tire and NATO Can Rear Bumper (PF842C)","description":"\u003cp style=\"font-weight: 400;\"\u003eThis heavy duty bumper is made from 1\/4\" sheet metal and offers the best body protection and style available for your Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation. \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThis bumper includes our new unique rack which puts the tire in the center of the tailgate but we also lowered it for added visibility while still being able to accept up to a 37\" spare tire with 5.25\" backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. \u003cspan style=\"font-weight: 400;\"\u003eTo add to this already awesome set-up, we added a basket between the tire carrier and the pivot system to house a 5-gallon NATO can. We put it here so there is no need to worry about adding extra leverage to the end of that long arm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eLike our standard tire rack design, this rack is made of 2\"x3\" x 0.188 wall rectangular tube. The hinge uses two 3\/4\" *\u003cstrong\u003e \u003c\/strong\u003epermanently lubricated heim joints to open the rack which are rated at 15,850 lbs of static radial load and our branded pivot brace which strengthens the pivot and adds an aggressive look to the overall structure.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eIncluded with this rugged rack is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you when you’re trying to get into the back. Lastly, we included a 2” unrated receiver hitch which is capable of pulling the stock recommended weight for your Bronco.*\u003c\/p\u003e\n\u003ch6\u003e1) This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch6\u003e2) These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/h6\u003e\n\u003ch6\u003e3) On 07\/30\/2023, we began using 3\/4\" Heims on the Centered Swing-out bumpers. The 5\/8 heims are not interchangeable with the 3\/4\" heims. The 5\/8\" heims with the grease zerk are rated at 6,850 lbs of static radial load. The 5\/8\" heims without grease zerk are rated at 11,350 lbs of static radial load.\u003c\/h6\u003e\n\u003ch6\u003e4) This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury.\u003c\/h6\u003e\n\u003ch3\u003eEdition\u003c\/h3\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eBox Kit: \u003c\/strong\u003eA completely disassembled kit, bent and ready to peace together and weld up. Arrives in a box and\u003cspan\u003e will require several hours of welding and grinding to complete however it is the most economical shipping option as it is in a box.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eTack Kit:\u003c\/strong\u003e A tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eWelded:\u003c\/strong\u003e Arrives as unfinished raw-steel ready to install. We ALWAYS recommend test-fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/p\u003e\n\u003ch6\u003e\u003cu\u003eXLT \/ Eddie Bauer Models\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eIf you run into an issue with the tailgate trim hitting the cam bail when the tailgate is open, you can run a new cable stop (approx 17\") on your tailgate. Otherwise, you will have to notch the trim.\u003c\/h6\u003e\n\u003ch6\u003e\u003cu\u003eMounting to F-Series Trucks\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eThere have been several people who have successfully put these bumpers on pickup trucks. Please keep in mind that these bumpers are made for the Ford Bronco and the stock axles they come with. These bumpers will fit on F-Series pickups however the frame is not the same, and sometimes the bolt pattern for the spare tire will be different. Mounting the rear bumper to a pickup truck is possible, however it may require moderate to heavy modification to install the bumper properly. You will have to order the correct wheel plate to make the spare tire fit. 8 lug wheel plates are an additional $45. The frame mounts will also need to be ordered unwelded and you will need to modify\/create a custom bracket for mounting. We DO NOT recommend putting these bumpers on pickup trucks unless you have an experienced fabricator contracted for the job. We DO NOT provide installation assistance in this case.\u003c\/h6\u003e\n\u003ch6\u003e\u003cu\u003eBumper Dimensions\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eInterior dimension between two side wings is 76\"\u003c\/h6\u003e\n\u003ch6\u003e\u003cu\u003eStandardized Bumper Changes\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eOrders placed before 06\/16\/2025 will come WITH an unrated receiver and the 5\/8\" pivot system unless ordered otherwise. They did not come with the rack lockout system unless ordered that way specifically.\u003c\/h6\u003e\n\u003ch6\u003eOrders placed between 06\/16\/2025 and 09\/31\/2025 automatically came with a 3\/4\" pivot system and the branded pivot brace as well as the rack lockout system at no additional charge. If you desire a receiver, you need to add the receiver to the bumper for an added charge.\u003c\/h6\u003e\n\u003ch6\u003eOrders placed on or after 10\/01\/2025 come WITH an unrated receiver, a 3\/4\" pivot system with PF branded pivot brace as well as the rack lockout system.\u003c\/h6\u003e\n\u003ch4\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/h4\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250705080606,"sku":"PF842C-K","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"Completely Welded","offer_id":49250705113374,"sku":"PF842C","price":1738.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Full-Size-Bronco-Rear-Bumper-_-RockSolid-_PF840_-ProtoFab-332558116.jpg?v=1763065517"},{"product_id":"protofab-1978-1979-bronco-rocksolid-double-rack-rear-bumper","title":"1978-1979 Bronco RockSolid Double Rack Rear Bumper (PF504)","description":"\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your full size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and also has Hi-Lift Jack access holes*\u003cspan\u003e* \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation. With its easy bolt-on installation that requires no welding or drilling*, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper has not one, but two removable swing out racks. One for your spare tire which can hold up to a 37” spare tire with 5.25\" backspacing, and the other rack houses either one or two NATO cans. This full size Bronco bumper with fuel carrier is exactly what you need to make your next trip a smashing success.\u003c\/p\u003e\n\u003ch6\u003e*These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan\u003e**This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, If you order a body lift, there may be a couple holes you have to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003cp\u003eHardware does not come with this product due to personal preference. You will need to source:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(6) 5\/8” x 1½” Hex head bolts\u003c\/li\u003e\n\u003cli\u003e(6) 5\/8” Nuts (preferably nylons however standard nuts will suffice with use of lock washers)\u003c\/li\u003e\n\u003cli\u003e(12) 5\/8” Flat washers\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e(6) 5\/8” Lock Washers (only if not using nylon nuts)\u003cb\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250705244446,"sku":"PF504-K","price":1564.07,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250705277214,"sku":"PF504","price":2085.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1978-1979-Bronco-RockSolid-Double-Rack-Rear-Bumper-_PF504_-ProtoFab-10500431.jpg?v=1760482613"},{"product_id":"1966-1977-bronco-rocksolid-lowpro-front-bumper-with-push-bar","title":"1966-1977 Bronco Bumper RockSolid LowPro with Push Bar (PF308)","description":"\u003cp\u003eThis early Bronco bumper is made completely of 3\/16'' Plate steel and is winch ready. The RockSolid™ Bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. Easy bolt-on installation with no welding or drilling required.\u003c\/p\u003e\n\u003cp\u003eThe bumper's interior is 7.25\" tall and utilizes the standard winch mount bolt pattern of 10 x 4.5. The winches that fit in this bumper are very limited and are a tight fit, but the following we know will fit without issue: Warn M8 and Warn VR Evo*. (The SmittyBilt \u003cstrong\u003eGen2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXRC 9.5 or 12k\u003cspan\u003e \u003c\/span\u003eand SmittyBilt X20 Gen2 have not been tested but the manufacturer has confirmed the height and based off that information it\u003cstrong\u003e MIGHT\u003c\/strong\u003e be a suitable fit for this bumper. \u003cstrong\u003e(The XRC Gen3 will not fit) \u003c\/strong\u003eWe cannot guarantee the fit of these products in this bumper so please test fit\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eright away\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein case you need to send the winch back.)\u003c\/p\u003e\n\u003cp\u003eThis very durable and modern design has multiple built in tow points or add a set of ‘D’ ring mounts for the ultimate tow points. This product is also available in kit form.  A body lift option is available for this product. If you have a body lift, this option will eliminate large gaps between your bumper, (which is mounted to the frame) and your truck body.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eTack Kit:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eWelded:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePush Bar Styles\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Bull Bar\u003c\/strong\u003e: A single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003ePre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cstrong\u003eAdd Ons\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 class=\"MsoNormal\"\u003eBody Lift\u003c\/h4\u003e\n\u003cp\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location. See our install guide for more information about how it works\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eSuggested Winches\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarn\u003cspan\u003e \u003c\/span\u003eM8\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack will need to be relocated to fit in this bumper. We suggest putting the winch pack under the hood to help keep it protected from the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarn VR Evo 8k,\u003cspan\u003e \u003c\/span\u003e10k\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e12k\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack and the cover above the cable spool will need to be removed for this to fit in this bumper. It is a tight fit, but should definitely fit. These winches have been successfully installed numerous times in this bumper. We recommend relocating the winch pack under the hood to help protect it from the elements.\u003c\/p\u003e\n","brand":"ProtoFab","offers":[{"title":"Tack Kit \/ Bull Bar","offer_id":49282457272606,"sku":"PF308-K-BB","price":640.4,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ Pre-Runner","offer_id":49282457338142,"sku":"PF308-K-PR","price":640.4,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Bull Bar","offer_id":49250706293022,"sku":"PF308-BB","price":711.55,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Pre-Runner","offer_id":49250706358558,"sku":"PF308-PR","price":711.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-Bumper-RockSolid-LowPro-with-Push-Bar-_PF308_-ProtoFab-10512523.jpg?v=1760482683"},{"product_id":"protofab-1973-1991-blazer-rocksolid™-double-rack-rear-bumper-pf1021","title":"1973-1991 Blazer RockSolid Double Rack Rear Bumper (PF1021)","description":"\u003ch3\u003eFinally, a Gen 2 Blazer bumper with fuel carrier.\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHave you been looking for a bumper that not only gets the spare tire off the body of your Blazer but also has a fuel carrier? This is the bumper for you!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis sleek bumper is made from CNC cut ¼” plate steel and offers the best body protection and style for your K5 Blazer. The design wraps around the rear corners to provide our quality protection.\u003c\/p\u003e\n\u003cp\u003eThis bumper has not one, but two removable swing out racks. One for your spare tire and the other for either one or two NATO cans. These racks are made with 2\"x3\" x 0.188 wall rectangular tubing which uses 3\/4\" permanently lubricated Heim joints to open and close the swing-out racks ensuring a smooth and easy hinge to maintain. To strengthen the pivot, we have added our branded pivot brace.\u003c\/p\u003e\n\u003cp\u003eIncluded with our rugged swing-out racks is our one-of a kind, fully adjustable cam latch system. You won't find these cams anywhere else, as they are built right here in-house. And last, but certainly not least, we include our Rack Lockout system which keeps the open rack from swinging too far and smacking you, your truck or nearby objects, accidentally. It’s easy to see what makes our bumper system the best you can equip your Blazer with! This K5 Blazer bumper with fuel carrier is exactly what you need to make your next trip a smashing success.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003eEdition\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eTack Kit:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eWelded:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBumper Dimensions\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003eInterior dimension between two side wings is 76\". \u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRack Lockout System\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003eOur new system stops the carrier automatically with our new t-handle pin\u003cstrong\u003e*\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esystem.  The t-handles are Anodized Black 1\/2″ billet aluminum.  The handle slides along a plate until it is in the optimal position and then the pin is released into a slot cut out of the plate. The system is also over-rideable if you want the rack to swing wider than the plate allows, simply pull up on the t-handle and continue pushing it past the plate.\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e*We do not manufacture the t-handles, they purchased from another company and incorporated into our new lockout system\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h6\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e","brand":"ProtoFab","offers":[{"title":"Welded","offer_id":49250707964190,"sku":"PF1021","price":2049.05,"currency_code":"USD","in_stock":true},{"title":"Kit","offer_id":49250707996958,"sku":"PF1021-K;","price":1844.15,"currency_code":"USD","in_stock":true}]},{"product_id":"80-86-bronco-front-winch-bumper-protofab-rocksolid-series","title":"80-86 Bronco Front Winch Bumper | ProtoFab RockSolid Series (PF800)","description":"\u003cp\u003eThe 80-86 Bronco Front Winch Bumper in our RockSolid Series is a favorite among full size Bronco owners. This full size Bronco front winch bumper offers full front end and fender protection with great approach angles. It is made from ¼” or 3\/16\" plate steel, is winch ready and is an easy bolt on installation.*\u003c\/p\u003e\n\u003cp\u003eThe RockSolid bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This bumper will fit \u003cspan style=\"text-decoration: underline;\"\u003ealmost any\u003c\/span\u003e winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".** \u003c\/p\u003e\n\u003ch6\u003e*This statement applies to the Fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch6\u003e**We have been told some very light trimming had to be done to the lip of the bumper's winch cavity for a customer who had a SmityBilt Gen 2 X2O Winch.\u003c\/h6\u003e\n\u003ch4\u003eEdition\u003c\/h4\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. \u003cspan style=\"color: rgb(234, 38, 15);\"\u003eThe lead time for this product is significantly less. (Typically a 4-8 week lead time)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Welded Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eCompletely Welded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch4\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003ch4\u003eGrille Protection\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top: \u003c\/strong\u003eNo push bar, just a nice clean surface.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003eYou will have to notch the bumper or cut the front fenders in order for this bumper to fit properly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003eF250\/350 Trucks: This will fit on your truck however you will have to do some minor drilling where existing rivets are and replace those rivets with grade 8 hardware. For any questions, please reach out so we can assess your exact situation.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit \/ 1\/4\" Sheet Metal \/ The Flat Top","offer_id":50789387174174,"sku":"PF800-BK-025","price":850.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ 1\/4\" Sheet Metal \/ The Bull Bar","offer_id":50789387206942,"sku":"PF800-BK-025-BB","price":910.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ 1\/4\" Sheet Metal \/ The Pre-Runner","offer_id":50789387239710,"sku":"PF800-BK-025-PR","price":950.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ 3\/16\" Sheet Metal \/ The Flat Top","offer_id":50789387272478,"sku":"PF800-BK-01875","price":750.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ 3\/16\" Sheet Metal \/ The Bull Bar","offer_id":50789387305246,"sku":"PF800-BK-01875-BB","price":810.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ 3\/16\" Sheet Metal \/ The Pre-Runner","offer_id":50789387338014,"sku":"PF800-BK-01875-PR","price":850.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ 1\/4\" Sheet Metal \/ The Flat Top","offer_id":49268942405918,"sku":"PF800-K-025","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ 1\/4\" Sheet Metal \/ The Bull Bar","offer_id":50789387370782,"sku":"PF800-K-025-BB","price":1110.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ 1\/4\" Sheet Metal \/ The Pre-Runner","offer_id":50789387403550,"sku":"PF800-K-025-PR","price":1150.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ 3\/16\" Sheet Metal \/ The Flat Top","offer_id":50789386682654,"sku":"PF800-K-01875","price":950.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ 3\/16\" Sheet Metal \/ The Bull Bar","offer_id":50789387436318,"sku":"PF800-K-01875-BB","price":1010.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ 3\/16\" Sheet Metal \/ The Pre-Runner","offer_id":50789387469086,"sku":"PF800-K-01875-PR","price":1050.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ 1\/4\" Sheet Metal \/ The Flat Top","offer_id":50789387501854,"sku":"PF800-025","price":1295.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ 1\/4\" Sheet Metal \/ The Bull Bar","offer_id":50789387534622,"sku":"PF800-025-BB","price":1355.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ 1\/4\" Sheet Metal \/ The Pre-Runner","offer_id":50789387567390,"sku":"PF800-025-PR","price":1395.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ 3\/16\" Sheet Metal \/ The Flat Top","offer_id":50789387600158,"sku":"PF800-01875","price":1195.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ 3\/16\" Sheet Metal \/ The Bull Bar","offer_id":50789387632926,"sku":"PF800-01875-BB","price":1255.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ 3\/16\" Sheet Metal \/ The Pre-Runner","offer_id":50789387665694,"sku":"PF800-01875-PR","price":1295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/80-86-Bronco-Front-Winch-Bumper-_-ProtoFab-RockSolid-Series-_PF800_-ProtoFab-741530040.png?v=1788391752"},{"product_id":"1978-1979-bronco-rocksolid-triple-rack-rear-bumper-pf505","title":"1978-1979 Bronco RockSolid Triple Rack Rear Bumper (PF505)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"color: #000000;\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style available for your full-size Bronco.  With its easy bolt-on installation that requires no welding or drilling, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"color: #000000;\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire and a 2\u003csup\u003end\u003c\/sup\u003e rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) as well as a 16\" x 24\" cooler rack. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\n\u003cspan style=\"color: #000000;\"\u003e*These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\n\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003eLooking for a cooler that will fit our cooler basket?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWe recommend:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca rel=\"noopener\" title=\"Canyon Outfiter 35 Qt Cooler\" href=\"https:\/\/canyoncoolers.com\/products\/outfitter-35?variant=8934184190009\" style=\"color: #000000;\" target=\"_blank\"\u003eCanyon Outfitter 35 Qt\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca rel=\"noopener\" title=\"Igloo BMX 53 Qt Cooler\" href=\"https:\/\/www.igloocoolers.com\/products\/bmx-52-qt-cooler?variant=32300957368403\" style=\"color: #000000;\" target=\"_blank\"\u003eIgloo BMX 52 Qt\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"color: #000000;\"\u003eDimension between two side wings is 76\"\u003c\/span\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49301133623582,"sku":"PF505-K","price":1804.82,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49301133656350,"sku":"PF505","price":2406.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1978-1979-Bronco-RockSolid-Triple-Rack-Rear-Bumper-_PF505_-ProtoFab-10532121.jpg?v=1760482759"},{"product_id":"1966-1977-bronco-rocksolid-centered-single-rack-rear-bumper","title":"66-77 Bronco Centered Spare Tire Rear Bumper | Centered Tire | RockSolid Series (PF303C)","description":"\u003ch2\u003e66-77 Bronco Bumper with lowered centered tire carrier.\u003c\/h2\u003e\n\u003cp\u003eThe 66-77 Bronco Centered Spare Tire Rear Bumper, also called the Centered Tire, is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation. \u003c\/p\u003e\n\u003cp\u003eThis bumper includes a unique rack designed to put the tire in the center of the tailgate and then we lowered it for added visibility while still being able to accept up to a 37\" tire with 5.25\" back spacing. Like our other tire rack design, this rack is made of 2\"x3\" x 0.188 wall rectangular tube with beefed up 3\/4\" pivot and heims*** which are rated at 15,850 lbs of static radial load. The heims are permanently lubricated which ensures a smooth and easy hinge to maintain and are easily replaced.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIncluded with these rugged is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location, preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e****\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, if you order a body lift, you will have a few holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e***On 07\/30\/2023, we began using 3\/4\" Heims on the Centered Swing-out bumpers. The 5\/8 heims are not interchangeable with the 3\/4\" heims. The 5\/8\" heims with the grease zerk are rated at 6,850 lbs of static radial load. The 5\/8\" heims without grease zerk are rated at 11,350 lbs of static radial load.\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e****This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e8-Lug Wheel Plate: \u003c\/strong\u003eIf your Bronco has Super Duty Axles you need to order the appropriate wheel plate. Choose from 8 x 6.5\" or 8 x 170mm.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cbr\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216813756702,"sku":"PF303C-BK","price":945.88,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49315491905822,"sku":"PF303C-K","price":945.88,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49315491938590,"sku":"PF303C","price":1118.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Centered-Spare-Tire-Rear-Bumper-_-Centered-Tire-_-RockSolid-Series-_PF303C_-ProtoFab-10535027.jpg?v=1760482779"},{"product_id":"1987-1991-bronco-rocksolid-front-bumper-with-push-bar-pf810","title":"87-91 Bronco Front Winch Bumper | ProtoFab RockSolid Series (PF810)","description":"\u003cp\u003eThe 87-91 Bronco Front Winch Bumper in our RockSolid Series is a favorite among full size Bronco owners. This full size Bronco front winch bumper offers full front end and fender protection with great approach angles. It is made from ¼” or 3\/16\" plate steel, is winch ready and is an easy bolt on installation.*\u003c\/p\u003e\n\u003cp\u003eThe RockSolid bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This bumper will fit \u003cspan style=\"text-decoration: underline;\"\u003ealmost any\u003c\/span\u003e winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".** \u003c\/p\u003e\n\u003ch6\u003e*This statement applies to the Fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch6\u003e**We have been told some very light trimming had to be done to the lip of the bumper's winch cavity for a customer who had a SmityBilt Gen 2 X2O Winch.\u003c\/h6\u003e\n\u003ch4\u003eEdition\u003c\/h4\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. \u003cspan style=\"color: rgb(234, 38, 15);\"\u003eThe lead time for this product is significantly less. (Typically a 4-8 week lead time)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Welded Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eCompletely Welded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eGrille Protection\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top: \u003c\/strong\u003eNo push bar, just a nice clean surface.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003eF250\/350 Trucks: This will fit on your truck however you may have to do some minor drilling where existing rivets are and replace those rivets with grade 8 hardware. For any questions, please reach out so we can assess your exact situation.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789567922462,"sku":null,"price":856.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789567955230,"sku":null,"price":749.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":50789567987998,"sku":null,"price":936.25,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789568020766,"sku":null,"price":829.25,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":50789568053534,"sku":null,"price":989.75,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789568086302,"sku":null,"price":882.75,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789568119070,"sku":null,"price":1043.25,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789568151838,"sku":null,"price":936.25,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49334403039518,"sku":"PF810-K-025-BB","price":1123.5,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789568184606,"sku":null,"price":1016.5,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49334399533342,"sku":"PF810-K-025-PR","price":1177.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789568217374,"sku":null,"price":1070.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789568250142,"sku":null,"price":1337.5,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789568282910,"sku":null,"price":1230.5,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49334403170590,"sku":"PF810-025-BB","price":1417.75,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789568315678,"sku":null,"price":1310.75,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49334399598878,"sku":"PF810-025-PR","price":1471.25,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789568348446,"sku":null,"price":1364.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1987-1991-Bronco-RockSolid-Front-Bumper-with-Push-Bar-_PF810_-ProtoFab-10546562.jpg?v=1760482845"},{"product_id":"full-size-bronco-rear-bumper-1980-1996-rocksolid-pf840","title":"1980-1996 Full Size Bronco Rear Bumper | RockSolid (PF840)","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003eFull Size Bronco Rear Bumper: RockSolid Quality and Durability\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your classic full-size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and has Hi-Lift Jack access holes* cut into the bottom area, should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWith its easy bolt-on installation that requires no welding or drilling**, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eLooking for more options?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpare Tire \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAdd a spare tire carrier to your bumper and get it off that quarter panel. We offer two unique racks designed to hold up to a 37” spare tire with 5.25\" backspacing* One rack puts the spare tire behind the passenger which mimics the stock location of the spare tire and the other centers and lowers the spare tire for a bit more visibility. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-size: 8.0pt; line-height: 115%;\"\u003e*If you are running a spare wheel with larger than 5.25” backspacing, you will need to use wheel spacers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFuel Storage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAdd some fuel storage to your bumper.  You can add a second swing out or, if you have the centered tire rack in mind, we can add a basket right next to the tire carrier, putting both solutions on one convenient swing-out rack.\u003cspan style=\"font-size: 8.0pt; line-height: 115%;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50285476708638,"sku":"PF840-BK","price":695.5,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49337064390942,"sku":"PF840-K","price":818.55,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49337064423710,"sku":"PF840","price":936.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Full-Size-Bronco-Rear-Bumper-_-RockSolid-_PF840_-ProtoFab-10547327.jpg?v=1760482846"},{"product_id":"1980-1996-bronco-rocksolid-triple-rack-rear-bumper","title":"1980-96 Bronco Triple Rack | ProtoFab RockSolid Series","description":"\u003ch2\u003e\n\u003cstrong\u003e1980-1996 Bronco Rear Bumper with Tire, Gas and Cooler racks.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"color: #000000;\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style available for your full-size Bronco.  With its easy bolt-on installation that requires no welding or drilling, it’s hard to beat.** Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"color: #000000;\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire and a 2\u003csup\u003end\u003c\/sup\u003e rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) as well as a 16\" x 24\" cooler rack. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003eLooking for a cooler that will fit our cooler basket?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWe recommend:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca rel=\"noopener\" title=\"Canyon Outfiter 35 Qt Cooler\" href=\"https:\/\/canyoncoolers.com\/products\/outfitter-35?variant=8934184190009\" style=\"color: #000000;\" target=\"_blank\"\u003eCanyon Outfitter 35 Qt\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca rel=\"noopener\" title=\"Igloo BMX 53 Qt Cooler\" href=\"https:\/\/www.igloocoolers.com\/products\/bmx-52-qt-cooler?variant=32300957368403\" style=\"color: #000000;\" target=\"_blank\"\u003eIgloo BMX 52 Qt\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"color: #000000;\"\u003eDimension between two side wings is 76\"\u003c\/span\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":60895093129502,"sku":null,"price":1400.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49342653268254,"sku":"PF843-K","price":1600.0,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49342653301022,"sku":"PF843","price":2200.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Bronco-RockSolid-Triple-Rack-Rear-Bumper-_PF843_-ProtoFab-10548016.jpg?v=1760482855"},{"product_id":"1973-1991-blazer-rocksolid-single-rack-rear-bumper-pf1020","title":"1973-1991 Blazer RockSolid Single Rack Rear Bumper (PF1020)","description":"\u003ch3\u003eFinally, a Gen 2 Blazer bumper with tire carrier.\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHave you been looking for a bumper that gets the spare tire off the body of your Blazer? This is the bumper for you!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis sleek bumper is made from CNC cut ¼” plate steel and offers the best body protection and style for your K5 Blazer. The design wraps around the rear corners to provide our quality protection.\u003c\/p\u003e\n\u003cp\u003eThis bumper has a removable swing out rack for your spare tire. This rack is made with 2\"x3\" x 0.188 wall rectangular tubing which uses 3\/4\" permanently lubricated Heim joints to open and close the swing-out rack ensuring a smooth and easy hinge to maintain. To strengthen the pivot, we have added our branded pivot brace.\u003c\/p\u003e\n\u003cp\u003eIncluded with our rugged swing-out rack is our one-of a kind, fully adjustable cam latch system. You won't find these cams anywhere else, as they are built right here in-house. And last, but certainly not least, we include our Rack Lockout system which keeps the open rack from swinging too far and smacking you, your truck or nearby objects, accidentally. It’s easy to see what makes our bumper system the best you can equip your Blazer with! This K5 Blazer bumper with spare tire carrier is exactly what you need to make your next trip a smashing success.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003eEdition\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eBox Kit:\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eTack Kit:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eWelded:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"text-decoration: underline;\"\u003eBumper Dimensions\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003eInterior dimension between two side wings is 76\". \u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eRack Lockout System\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003eOur new system stops the carrier automatically with our new t-handle pin\u003cstrong\u003e*\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003esystem.  The t-handles are 1\/2″ billet aluminum.  The handle slides along a plate until it is in the optimal position and then the pin is released into a slot cut out of the plate. The system is also over-rideable if you want the rack to swing wider than the plate allows, simply pull up on the t-handle and continue pushing it past the plate.\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e*We do not manufacture the t-handles, they purchased from another company and incorporated into our new lockout system\u003cspan\u003e\u003c\/span\u003e\n\u003c\/h6\u003e\n\u003ch5\u003e\u003cbr\u003e\u003c\/h5\u003e","brand":"ProtoFab","offers":[{"title":"Welded","offer_id":59575806755102,"sku":null,"price":2049.05,"currency_code":"USD","in_stock":true},{"title":"Kit","offer_id":59575806787870,"sku":null,"price":1844.15,"currency_code":"USD","in_stock":true}]}],"url":"https:\/\/www.protofab4x4.com\/collections\/rocksolid-series.oembed?page=2","provider":"ProtoFab","version":"1.0","type":"link"}