{"title":"87-91 Bronco Bumpers","description":"","products":[{"product_id":"1980-1996-bronco-rocksolid-double-rack-rear-bumper","title":"1980-1996 Bronco RockSolid Double Rack Rear Bumper (PF842)","description":"\u003ch3\u003eFinally, a full size Bronco bumper with fuel carrier.\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHave you been looking for a bumper that not only gets the spare tire off the body of your Bronco but also has a fuel carrier? This is the bumper for you!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your full size Bronco. The design wraps around the rear corners to provide our quality protection. This bumper has not one, but two removable swing out racks. One for your spare tire and the other for either one or two NATO cans. This bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" backspacing. (If you are running a wheel with a larger backspacing, you will need to use wheel spacers.)\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese racks are made of 2\" x 3\" x 0.188 wall rectangular tube. Each hinge uses two 3\/4\" permanently lubricated heim joints to open the rack. This ensures a smooth and easy hinge to maintain. Included with each of these rugged racks is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” unrated receiver hitch which is capable of pulling the stock recommended weight for your Bronco.*** \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIt’s easy to see what makes our bumper system the best you can equip your Bronco with! This full size Bronco bumper with fuel carrier is exactly what you need to make your next trip a smashing success.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003eEdition\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eTack Kit:\u003c\/b\u003e A tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eWelded:\u003c\/b\u003e Arrives as unfinished raw-steel ready to install. We ALWAYS recommend test-fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis product includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli class=\"MsoNormal\"\u003e1980-1996 Bronco Bumper\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e2 removeable swing out racks\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e2 Lockout Mechanisms\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003eUnrated 2\" Receiver \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cblockquote\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003eHardware does not come with this product due to personal preference of hardware grade. You will need to source: (6) 5\/8” x 1½” Hex head bolts, (6) 5\/8” Nuts (preferably nylons however standard nuts will suffice with use of lock washers), (12) 5\/8” Flat washers, (6) 5\/8” Lock Washers (only if not using nylon nuts)\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/blockquote\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. \u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003e***This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury.\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003eXLT \/ Eddie Bauer Models\u003c\/u\u003e\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003eIf you run into an issue with the tailgate trim hitting the cam bail when the tailgate is open, you can run a new cable stop (approx 17\") on your tailgate. Otherwise, you will have to notch the trim.\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003eMounting to F-Series Trucks\u003c\/u\u003e\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003eThere have been several people who have successfully put these bumpers on pickup trucks. Please keep in mind that these bumpers are made for the Ford Bronco and the stock axles they come with. These bumpers will fit on F-Series pickups however the frame is not the same, and sometimes the bolt pattern for the spare tire will be different. Mounting the rear bumper to a pickup truck is possible, however it may require moderate to heavy modification to install the bumper properly. You will have to order the correct wheel plate to make the spare tire fit. 8 lug wheel plates are an additional $45. The frame mounts will also need to be ordered unwelded and you will need to modify\/create a custom bracket for mounting. We DO NOT recommend putting these bumpers on pickup trucks unless you have an experienced fabricator contracted for the job. We DO NOT provide installation assistance in this case.\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003eBumper Dimensions\u003c\/u\u003e\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003eInterior dimension between two side wings is 76\"\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cu\u003eStandardized Bumper Changes\u003c\/u\u003e\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003eOrders placed before 06\/16\/2025 will come WITH an unrated receiver and the 5\/8\" pivot system unless ordered otherwise. They did not come with the rack lockout system unless ordered that way specifically.\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003eOrders placed between 06\/16\/2025 and 09\/31\/2025 automatically came with a 3\/4\" pivot system and the branded pivot brace as well as the rack lockout system at no additional charge. If you desire a receiver, you need to add the receiver to the bumper for an added charge.\u003c\/b\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cb\u003eOrders placed on or after 10\/01\/2025 come WITH an unrated receiver, a 3\/4\" pivot system with PF branded pivot brace as well as the rack lockout system.\u003c\/b\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250708848926,"sku":"PF842-K","price":1584.94,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250708881694,"sku":"PF842","price":2113.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Full-Size-Bronco-Rear-Bumper-_-RockSolid-_PF840_-ProtoFab-332557984.jpg?v=1776291316"},{"product_id":"1980-1996-bronco-rocksolid™-single-rack-rear-bumper-pf817","title":"1980-1996 Bronco RockSolid Single Rack Rear Bumper (PF841)","description":"\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your classic full-size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and has Hi-Lift Jack access holes* cut into the bottom area, should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWith its easy bolt-on installation that requires no welding or drilling**, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. \u003c\/p\u003e\n\u003ch6\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Kit","offer_id":49250708914462,"sku":"PF841-K","price":1219.8,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250708947230,"sku":"PF841","price":1524.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Full-Size-Bronco-Rear-Bumper-_-RockSolid-_PF840_-ProtoFab-332557883.png?v=1763065482"},{"product_id":"1980-1996-bronco-rocksolid-centered-single-rack-rear-bumper","title":"1980-1996 Bronco RockSolid™ Centered Single Rack Rear Bumper (PF841C)","description":"\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your full size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and also has Hi-Lift Jack access holes* \u003c\/span\u003e\u003cspan\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation. With its easy bolt-on installation that requires no welding or drilling**, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper includes our new unique rack which puts the tire in the center of the tailgate but we also lowered it for added visibility while still being able to accept up to a 37\" spare tire with 5.25\" backspacing. (If you are running a wheel with a larger backspacing, you will need to use wheel spacers.)\u003c\/p\u003e\n\u003ch6\u003e*These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan\u003e**This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, If you order a body lift, there may be a couple holes you have to drill.\u003c\/span\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250701738270,"sku":"PF841C-K","price":1323.32,"currency_code":"USD","in_stock":true},{"title":"Completely Welded","offer_id":49250701771038,"sku":"PF841C","price":1764.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Bronco-RockSolidTM-Centered-Single-Rack-Rear-Bumper-_PF841C_-ProtoFab-10464538.jpg?v=1760482478"},{"product_id":"1980-1996-bronco-rocksolid-centered-tire-and-nato-can-rear-bumper","title":"1980-1996 Bronco RockSolid Centered Tire and NATO Can Rear Bumper (PF842C)","description":"\u003cp style=\"font-weight: 400;\"\u003eThis heavy duty bumper is made from 1\/4\" sheet metal and offers the best body protection and style available for your Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation. \u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eThis bumper includes our new unique rack which puts the tire in the center of the tailgate but we also lowered it for added visibility while still being able to accept up to a 37\" spare tire with 5.25\" backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. \u003cspan style=\"font-weight: 400;\"\u003eTo add to this already awesome set-up, we added a basket between the tire carrier and the pivot system to house a 5-gallon NATO can. We put it here so there is no need to worry about adding extra leverage to the end of that long arm.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eLike our standard tire rack design, this rack is made of 2\"x3\" x 0.188 wall rectangular tube. The hinge uses two 3\/4\" *\u003cstrong\u003e \u003c\/strong\u003epermanently lubricated heim joints to open the rack which are rated at 15,850 lbs of static radial load and our branded pivot brace which strengthens the pivot and adds an aggressive look to the overall structure.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003eIncluded with this rugged rack is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you when you’re trying to get into the back. Lastly, we included a 2” unrated receiver hitch which is capable of pulling the stock recommended weight for your Bronco.*\u003c\/p\u003e\n\u003ch6\u003e1) This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch6\u003e2) These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/h6\u003e\n\u003ch6\u003e3) On 07\/30\/2023, we began using 3\/4\" Heims on the Centered Swing-out bumpers. The 5\/8 heims are not interchangeable with the 3\/4\" heims. The 5\/8\" heims with the grease zerk are rated at 6,850 lbs of static radial load. The 5\/8\" heims without grease zerk are rated at 11,350 lbs of static radial load.\u003c\/h6\u003e\n\u003ch6\u003e4) This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury.\u003c\/h6\u003e\n\u003ch3\u003eEdition\u003c\/h3\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eBox Kit: \u003c\/strong\u003eA completely disassembled kit, bent and ready to peace together and weld up. Arrives in a box and\u003cspan\u003e will require several hours of welding and grinding to complete however it is the most economical shipping option as it is in a box.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eTack Kit:\u003c\/strong\u003e A tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp style=\"font-weight: 400;\"\u003e\u003cstrong\u003eWelded:\u003c\/strong\u003e Arrives as unfinished raw-steel ready to install. We ALWAYS recommend test-fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/p\u003e\n\u003ch6\u003e\u003cu\u003eXLT \/ Eddie Bauer Models\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eIf you run into an issue with the tailgate trim hitting the cam bail when the tailgate is open, you can run a new cable stop (approx 17\") on your tailgate. Otherwise, you will have to notch the trim.\u003c\/h6\u003e\n\u003ch6\u003e\u003cu\u003eMounting to F-Series Trucks\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eThere have been several people who have successfully put these bumpers on pickup trucks. Please keep in mind that these bumpers are made for the Ford Bronco and the stock axles they come with. These bumpers will fit on F-Series pickups however the frame is not the same, and sometimes the bolt pattern for the spare tire will be different. Mounting the rear bumper to a pickup truck is possible, however it may require moderate to heavy modification to install the bumper properly. You will have to order the correct wheel plate to make the spare tire fit. 8 lug wheel plates are an additional $45. The frame mounts will also need to be ordered unwelded and you will need to modify\/create a custom bracket for mounting. We DO NOT recommend putting these bumpers on pickup trucks unless you have an experienced fabricator contracted for the job. We DO NOT provide installation assistance in this case.\u003c\/h6\u003e\n\u003ch6\u003e\u003cu\u003eBumper Dimensions\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eInterior dimension between two side wings is 76\"\u003c\/h6\u003e\n\u003ch6\u003e\u003cu\u003eStandardized Bumper Changes\u003c\/u\u003e\u003c\/h6\u003e\n\u003ch6\u003eOrders placed before 06\/16\/2025 will come WITH an unrated receiver and the 5\/8\" pivot system unless ordered otherwise. They did not come with the rack lockout system unless ordered that way specifically.\u003c\/h6\u003e\n\u003ch6\u003eOrders placed between 06\/16\/2025 and 09\/31\/2025 automatically came with a 3\/4\" pivot system and the branded pivot brace as well as the rack lockout system at no additional charge. If you desire a receiver, you need to add the receiver to the bumper for an added charge.\u003c\/h6\u003e\n\u003ch6\u003eOrders placed on or after 10\/01\/2025 come WITH an unrated receiver, a 3\/4\" pivot system with PF branded pivot brace as well as the rack lockout system.\u003c\/h6\u003e\n\u003ch4\u003e\u003cspan style=\"font-weight: 400;\"\u003e\u003c\/span\u003e\u003c\/h4\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250705080606,"sku":"PF842C-K","price":1391.0,"currency_code":"USD","in_stock":true},{"title":"Completely Welded","offer_id":49250705113374,"sku":"PF842C","price":1738.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Full-Size-Bronco-Rear-Bumper-_-RockSolid-_PF840_-ProtoFab-332558116.jpg?v=1763065517"},{"product_id":"1987-1991-bronco-rocksolid-front-bumper-with-push-bar-pf810","title":"87-91 Bronco Front Winch Bumper | ProtoFab RockSolid Series (PF810)","description":"\u003cp\u003eThe 87-91 Bronco Front Winch Bumper in our RockSolid Series is a favorite among full size Bronco owners. This full size Bronco front winch bumper offers full front end and fender protection with great approach angles. It is made from ¼” or 3\/16\" plate steel, is winch ready and is an easy bolt on installation.*\u003c\/p\u003e\n\u003cp\u003eThe RockSolid bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This bumper will fit \u003cspan style=\"text-decoration: underline;\"\u003ealmost any\u003c\/span\u003e winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".** \u003c\/p\u003e\n\u003ch6\u003e*This statement applies to the Fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch6\u003e**We have been told some very light trimming had to be done to the lip of the bumper's winch cavity for a customer who had a SmityBilt Gen 2 X2O Winch.\u003c\/h6\u003e\n\u003ch4\u003eEdition\u003c\/h4\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. \u003cspan style=\"color: rgb(234, 38, 15);\"\u003eThe lead time for this product is significantly less. (Typically a 4-8 week lead time)\u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Welded Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eCompletely Welded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch4\u003eGrille Protection\u003c\/h4\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top: \u003c\/strong\u003eNo push bar, just a nice clean surface.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #0000ff;\"\u003eF250\/350 Trucks: This will fit on your truck however you may have to do some minor drilling where existing rivets are and replace those rivets with grade 8 hardware. For any questions, please reach out so we can assess your exact situation.\u003c\/span\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789567922462,"sku":null,"price":856.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789567955230,"sku":null,"price":749.0,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":50789567987998,"sku":null,"price":936.25,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789568020766,"sku":null,"price":829.25,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":50789568053534,"sku":null,"price":989.75,"currency_code":"USD","in_stock":true},{"title":"Box Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789568086302,"sku":null,"price":882.75,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789568119070,"sku":null,"price":1043.25,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789568151838,"sku":null,"price":936.25,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49334403039518,"sku":"PF810-K-025-BB","price":1123.5,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789568184606,"sku":null,"price":1016.5,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49334399533342,"sku":"PF810-K-025-PR","price":1177.0,"currency_code":"USD","in_stock":true},{"title":"Tack Welded Kit \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789568217374,"sku":null,"price":1070.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 1\/4\" Sheet Metal","offer_id":50789568250142,"sku":null,"price":1337.5,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top \/ 3\/16\" Sheet Metal","offer_id":50789568282910,"sku":null,"price":1230.5,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 1\/4\" Sheet Metal","offer_id":49334403170590,"sku":"PF810-025-BB","price":1417.75,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar \/ 3\/16\" Sheet Metal","offer_id":50789568315678,"sku":null,"price":1310.75,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 1\/4\" Sheet Metal","offer_id":49334399598878,"sku":"PF810-025-PR","price":1471.25,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner \/ 3\/16\" Sheet Metal","offer_id":50789568348446,"sku":null,"price":1364.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1987-1991-Bronco-RockSolid-Front-Bumper-with-Push-Bar-_PF810_-ProtoFab-10546562.jpg?v=1760482845"},{"product_id":"full-size-bronco-rear-bumper-1980-1996-rocksolid-pf840","title":"1980-1996 Full Size Bronco Rear Bumper | RockSolid (PF840)","description":"\u003ch2 id=\"tinymce_scroll_sign\"\u003eFull Size Bronco Rear Bumper: RockSolid Quality and Durability\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style for your classic full-size Bronco. The design wraps around the rear corners providing quality protection for those precious quarter panels and has Hi-Lift Jack access holes* cut into the bottom area, should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eWith its easy bolt-on installation that requires no welding or drilling**, it’s easy to see what makes our bumper system the best bumper you can equip your Bronco with!\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003eLooking for more options?\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSpare Tire \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAdd a spare tire carrier to your bumper and get it off that quarter panel. We offer two unique racks designed to hold up to a 37” spare tire with 5.25\" backspacing* One rack puts the spare tire behind the passenger which mimics the stock location of the spare tire and the other centers and lowers the spare tire for a bit more visibility. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"font-size: 8.0pt; line-height: 115%;\"\u003e*If you are running a spare wheel with larger than 5.25” backspacing, you will need to use wheel spacers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eFuel Storage\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eAdd some fuel storage to your bumper.  You can add a second swing out or, if you have the centered tire rack in mind, we can add a basket right next to the tire carrier, putting both solutions on one convenient swing-out rack.\u003cspan style=\"font-size: 8.0pt; line-height: 115%;\"\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50285476708638,"sku":"PF840-BK","price":695.5,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49337064390942,"sku":"PF840-K","price":818.55,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49337064423710,"sku":"PF840","price":936.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Full-Size-Bronco-Rear-Bumper-_-RockSolid-_PF840_-ProtoFab-10547327.jpg?v=1760482846"},{"product_id":"1980-1996-bronco-rocksolid-triple-rack-rear-bumper","title":"1980-1996 Bronco RockSolid Triple Rack Rear Bumper (PF843)","description":"\u003ch2\u003e\n\u003cstrong\u003e1980-1996 Bronco Rear Bumper with Tire, Gas and Cooler racks.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"color: #000000;\"\u003eThis sleek full size Bronco bumper is made from ¼” plate steel and offers the best body protection and style available for your full-size Bronco.  With its easy bolt-on installation that requires no welding or drilling, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes* cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan style=\"color: #000000;\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire and a 2\u003csup\u003end\u003c\/sup\u003e rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) as well as a 16\" x 24\" cooler rack. \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\n\u003cspan style=\"color: #000000;\"\u003e*These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\n\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"color: #000000;\"\u003eLooking for a cooler that will fit our cooler basket?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eWe recommend:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca rel=\"noopener\" title=\"Canyon Outfiter 35 Qt Cooler\" href=\"https:\/\/canyoncoolers.com\/products\/outfitter-35?variant=8934184190009\" style=\"color: #000000;\" target=\"_blank\"\u003eCanyon Outfitter 35 Qt\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cspan style=\"color: #000000;\"\u003e\u003ca rel=\"noopener\" title=\"Igloo BMX 53 Qt Cooler\" href=\"https:\/\/www.igloocoolers.com\/products\/bmx-52-qt-cooler?variant=32300957368403\" style=\"color: #000000;\" target=\"_blank\"\u003eIgloo BMX 52 Qt\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"color: #000000;\"\u003esion between two side wings is 76\"\u003c\/span\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49342653268254,"sku":"PF843-K","price":1965.32,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49342653301022,"sku":"PF843","price":2620.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Bronco-RockSolid-Triple-Rack-Rear-Bumper-_PF843_-ProtoFab-10548016.jpg?v=1760482855"},{"product_id":"1980-1996-tube-style-rear-bumper-pf844","title":"1980-1996 Tube Style Rear Bumper (PF844)","description":"","brand":"ProtoFab","offers":[{"title":"Default Title","offer_id":49358898626846,"sku":"PF844","price":747.93,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1980-1996-Tube-Style-Rear-Bumper-_PF844_-ProtoFab-10549465.jpg?v=1760482857"}],"url":"https:\/\/www.protofab4x4.com\/collections\/87-91-bronco-bumpers.oembed","provider":"ProtoFab","version":"1.0","type":"link"}