{"title":"1966-77 Bronco Bumpers","description":"","products":[{"product_id":"1966-1977-bronco-rocksolid-front-bumper-with-push-bar","title":"1966-1977 Bronco Bumper RockSolid Front with Push Bar (PF300)","description":"\u003cp\u003eThis classy front bumper offers full front end and fender protection with great approach angles. It is made from ¼” CNC cut plate steel, it's winch ready and is an easy bolt on installation.\u003c\/p\u003e\n\u003cp\u003eThe RockSolid bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. It will add protection and style to our classic RockSolid look. This bumper will fit almost any winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".\u003c\/p\u003e\n\u003cp\u003eEasy bolt-on installation with no welding required however you will need to drill four 7\/16\" holes\u003cstrong\u003e IN YOUR BUMPER \u003c\/strong\u003eto install, so please test fit the bumper to the truck before you apply paint or powder coat so that you can drill the appropriate holes. You will use the holes in the front of your Bronco Frame as the mark for where the holes should be drilled. Drill a hole in the top and bottom of each side of the bumper frame mount.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 14.0pt; line-height: 107%;\"\u003ePush Bar Styles\u003c\/span\u003e\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Bull Bar\u003c\/strong\u003e: A single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003ePre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan style=\"font-size: 14.0pt; line-height: 107%;\"\u003eEdition\u003c\/span\u003e\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eTack Kit:\u003c\/strong\u003e A tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/p\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: This bumper is not offered with a body lift option. You can still run this bumper if you have a body lift, the extra spacers are not needed due to the engineering of the bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit \/ Pre-Runner Bar","offer_id":49250698658078,"sku":"PF300-K-PR","price":659.66,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ Bull Bar","offer_id":49261665550622,"sku":"PF300-K-BB","price":659.66,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Pre-Runner Bar","offer_id":49250698690846,"sku":"PF300-PR","price":732.95,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Bull Bar","offer_id":49261665616158,"sku":"PF300-BB","price":732.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-Bumper-RockSolid-Front-with-Push-Bar-_PF300_-ProtoFab-10420576.jpg?v=1760482160"},{"product_id":"1966-1977-bronco-rocksolid-rear-bumper","title":"66-77 Bronco Rear Bumper | RockSolid Series","description":"\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eThis sleek early Bronco bumper is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes** cut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003eLastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.***\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. All other editions require several hours of welding and grinding. Additionally, if you order with a body lift, you will have two holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*** This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline; color: rgb(0, 0, 0);\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eSpare Tire Carrier: \u003c\/strong\u003eAdd a spare tire carrier to your bumper and get it off that Quarter panel! The rack is able to hold 37\" tire with 5.25\" back spacing (differing back spacing will need wheel spacers). Made of 2\"x3\" x 0.188 wall rectangular tube with a 3\/4\" pivot and 2  permanently lubricated 3\/4\" heims rated at 15,850 lbs of static radial load. Comes with Cam latch mechanism and Rack Lockout system.\u003c\/p\u003e\n\u003ctable style=\"height: 70px; width: 99.679%;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.6px;\"\u003e\n\u003ctd style=\"height: 19.6px; width: 100%;\"\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e A rack that puts the spare tire on the passenger side similar to factory location.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 55.2px;\"\u003e\n\u003ctd style=\"height: 55.2px; width: 100%;\"\u003e\n\u003cp\u003e\u003cstrong\u003eCentered: \u003c\/strong\u003e A rack that puts the spare tire in the center of the tailgate with a lowered wheel plate for added visibility.\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFuel Can Carrier: \u003c\/strong\u003eAdd a fuel can rack to your bumper.\u003c\/p\u003e\n\u003ctable style=\"height: 98px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eSingle\/Double Can:\u003c\/strong\u003e An additional rack added on the driver's side. Made of 2\"x3\" x 0.188 wall rectangular tube with 3\/4\" pivot and 2 permanently lubricated 3\/4\" heims rated at 15,850 lbs of static radial load. Comes with Cam latch mechanism and Rack Lockout system.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"height: 39.2px;\"\u003e\n\u003cstrong\u003eRotoPax Mount:\u003c\/strong\u003e Available for our Centered Tire rack. Mounts a 4gal RotoPax to the back side of the Tire Carrier.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216987230494,"sku":"PF302-BK","price":450.2,"currency_code":"USD","in_stock":false},{"title":"Tack Kit","offer_id":49250702590238,"sku":"PF302-K","price":450.2,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49250702721310,"sku":"PF302","price":529.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Rear-Bumper-_-RockSolid-Series-ProtoFab-10420672.jpg?v=1760482161"},{"product_id":"1966-1977-bronco-rocksolid-flat-top-front-bumper","title":"66-77 Bronco Front Winch Bumper | RockSolid Series (PF301)","description":"\u003cp\u003eThis classy early bronco bumper offers full front end and fender protection with great approach angles. It is made from ¼” plate steel, it's winch ready and is an easy bolt on installation.\u003c\/p\u003e\n\u003cp\u003eThe RockSolid™ Bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This very durable and modern design has multiple built in tow points or add a set of ‘D’ ring tabs for the ultimate tow points. \u0026gt;This bumper will fit almost any winch so long as it uses the standard mounting bolt pattern which is 10\" x 4.5\".\u003c\/p\u003e\n\u003cp\u003eEasy bolt-on installation with no welding required however you will need to drill four 7\/16\" holes \u003cstrong\u003eIN YOUR BUMPER\u003c\/strong\u003e to install, so please test fit the bumper to the truck before you apply paint or powder coat so that you can drill the appropriate hole. You will use the holes in the front of your Bronco Frame as the mark for where the holes should be drilled. Drill a hole in the top and bottom of each side of the bumper frame mount.\u003c\/p\u003e\n\u003ch6\u003e*This statement applied to the fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePush Bar: \u003c\/strong\u003eAdd a push bar to your front bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable width=\"100%\" style=\"height: 98px;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top (No Bar): \u003c\/strong\u003eJust like it sounds. This option means there is no push bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"height: 39.2px;\"\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff0000;\"\u003eNote: This bumper is not offered with a body lift option. You can still run this bumper if you have a body lift, the extra spacers are not needed due to the engineering of the bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216929132830,"sku":"PF301-BK","price":632.1,"currency_code":"USD","in_stock":false},{"title":"Tack Kit","offer_id":49250703245598,"sku":"PF301-K","price":632.1,"currency_code":"USD","in_stock":true},{"title":"Completely Welded","offer_id":49250703278366,"sku":"PF301","price":743.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Front-Winch-Bumper-_-RockSolid-Series-_PF301_-ProtoFab-10421463.jpg?v=1760482169"},{"product_id":"1966-1977-bronco-rocksolid-single-rack-rear-bumper","title":"66-77 Bronco Spare Tire Rear Bumper | Single Rack | RockSolid Series (PF303)","description":"\u003cp\u003eThis sleek early Bronco bumper is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling*, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes*\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" backspacing. If you are running a wheel with a larger backspacing, you will need to use wheel spacers. This rack is made of 2\" x 3\" x 0.188 wall rectangular tube. The hinge uses two 3\/4\" permanently lubricated heim joints to open the rack. This ensures a smooth and easy hinge to maintain. Included with this rugged rack is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e\u003cb\u003e.**\u003c\/b\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, If you order a body lift, there may be a couple holes you have to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e***This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable width=\"100%\" style=\"height: 196px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Body Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e8-Lug Wheel Plate\u003c\/strong\u003e: If your truck has Super Duty axles under it, you need to order the appropriate wheel plate. Choose from 8x6.5\" or 8x170mm.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216765620510,"sku":"PF303-BK","price":800.0,"currency_code":"USD","in_stock":true},{"title":"Tack Kit","offer_id":49250706850078,"sku":"PF303-K","price":900.0,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49250706882846,"sku":"PF303","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Spare-Tire-Rear-Bumper-_-Single-Rack-_-RockSolid-Series-_PF303_-ProtoFab-10423049.jpg?v=1760482181"},{"product_id":"1966-1977-bronco-rocksolid-double-rack-rear-bumper","title":"66-77 Bronco Spare Tire and Gas Can Rear Bumper | Double Rack | RockSolid Series (PF304)","description":"\u003cp\u003e66-77 Bronco Spare Tire and Gas Can Rear Bumper, also called the Double Rack, is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" back spacing and a 2\u003csup\u003end\u003c\/sup\u003e rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) however you can upgrade the basket to hold two cans.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese racks are made of 2\"x3\" x 0.188 wall rectangular tube. The hinges use two 3\/4\" permanently lubricated heim joints to open the racks. This ensures a smooth and easy hinge to maintain. Included with these rugged racks are two of our coveted Cam latch mechanisms which are adjustable and offer many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e***\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, if you order a body lift, you will have a few holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*** This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable width=\"100%\" style=\"height: 196px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e8-Lug Wheel Plate: \u003c\/strong\u003eIf your Bronco has Super Duty Axles you need to order the appropriate wheel plate. Choose from 8 x 6.5\" or 8 x 170mm.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eUpgraded Fuel Storage Capacity: \u003c\/strong\u003eExpand the basket to make room for 2 NATO cans instead of just one.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216735703326,"sku":"PF304-BK","price":1449.74,"currency_code":"USD","in_stock":false},{"title":"Tack Kit","offer_id":49259014029598,"sku":"PF304-K","price":1449.74,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49259014127902,"sku":"PF304","price":1705.58,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Spare-Tire-and-Gas-Can-Rear-Bumper-_-Double-Rack-_-RockSolid-Series-_PF304_-ProtoFab-10425073.jpg?v=1760482197"},{"product_id":"1966-1977-bronco-rocksolid-triple-rack-rear-bumper","title":"1966-1977 Bronco RockSolid Triple Rack Rear Bumper (PF305)","description":"\u003cp\u003e66-77 Bronco Spare Tire and Gas Can and Cooler Basket Rear Bumper, also called the Triple Rack, is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation.\u003c\/p\u003e\n\u003cp\u003eThis bumper includes a unique rack designed to hold up to a 37” spare tire with 5.25\" back spacing and a 2\u003csup\u003end\u003c\/sup\u003e rack that holds one 5-gallon (20 liter) military style NATO Can (Jerry Can) AND a 16\" x 24\" Cooler Basket.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eThese racks are made of 2\"x3\" x 0.188 wall rectangular tube. The hinges use two 3\/4\" permanently lubricated heim joints to open the racks. This ensures a smooth and easy hinge to maintain. Included with these rugged racks are two of our coveted Cam latch mechanisms which are adjustable and offer many years of rattle free use. Each rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e***\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, if you order a body lift, you will have a few holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*** This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e8-Lug Wheel Plate: \u003c\/strong\u003eIf your Bronco has Super Duty Axles you need to order the appropriate wheel plate. Choose from 8 x 6.5\" or 8 x 170mm.\u003c\/p\u003e\n\u003ch3\u003eLooking for a cooler that will fit our cooler basket?\u003c\/h3\u003e\n\u003cp\u003eWe recommend:\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003ca href=\"https:\/\/canyoncoolers.com\/products\/outfitter-35?variant=8934184190009\" title=\"Canyon Outfiter 35 Qt Cooler\" rel=\"noopener\" target=\"_blank\"\u003eCanyon Outfitter 35 Qt\u003c\/a\u003e\u003c\/p\u003e\n\u003cp style=\"margin-bottom: 0px;\"\u003e\u003ca href=\"https:\/\/www.igloocoolers.com\/products\/bmx-52-qt-cooler?variant=32300957368403\" title=\"Igloo BMX 53 Qt Cooler\" rel=\"noopener\" target=\"_blank\"\u003eIgloo BMX 52 Qt\u003c\/a\u003e\u003c\/p\u003e\n\u003cul class=\"descrip\"\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216838693150,"sku":"PF305-BK","price":1704.51,"currency_code":"USD","in_stock":false},{"title":"Tack Kit","offer_id":49250708324638,"sku":"PF305-K","price":1704.51,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49250708357406,"sku":"PF305","price":2265.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-RockSolid-Triple-Rack-Rear-Bumper-_PF305_-ProtoFab-10426072.jpg?v=1760482208"},{"product_id":"1966-1977-bronco-rocksolid-lowpro-front-bumper","title":"66-77 Bronco Hidden Winch Front Bumper | LowPro | RockSolid Series (PF307)","description":"\u003cp\u003eThe 66-77 Bronco Hidden Winch Front Bumper, also called The LowPro, is a favorite among classic bronco owners. This Bronco bumper is made completely of 3\/16'' Plate steel and is winch ready. Easy bolt-on installation with no welding or drilling required.*\u003c\/p\u003e\n\u003cp\u003eThe RockSolid™ Bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. This very durable and modern design has multiple built in tow points or add a set of ‘D’ ring tabs for the ultimate tow points.\u003c\/p\u003e\n\u003ch6\u003e*This statement applied to the fully Welded edition of our bumper. The other editions require several hours of welding and grinding.\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePush Bar: \u003c\/strong\u003eAdd a push bar to your front bumper.\u003c\/span\u003e\u003c\/p\u003e\n\u003ctable style=\"height: 98px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cstrong\u003eThe Flat Top (No Bar): \u003c\/strong\u003eJust like it sounds. This option means there is no push bar.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 39.2px;\"\u003e\n\u003ctd style=\"height: 39.2px;\"\u003e\n\u003cstrong\u003eThe Bull Bar: \u003c\/strong\u003eA single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003e The Pre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable Body Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eSuggested winches\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe bumper's interior is 7.25\" tall and utilizes the standard winch mount bolt pattern of 10\" x 4.5\". The winches that fit in this bumper are \u003cstrong\u003every limited\u003c\/strong\u003e and are a tight fit, but the following we know will fit without issue: Warn M8 and Warn VR Evo*. \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarn \u003ca href=\"https:\/\/protofab4x4.com\/products\/warn-industries-m8-industrial-winch\" title=\"Warn M8 Winch\" rel=\"noopener\" target=\"_blank\"\u003eM8\u003c\/a\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack will need to be relocated to fit in this bumper. We suggest putting the winch pack under the hood to help keep it protected from the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eWarn VR Evo \u003ca href=\"http:\/\/protofab4x4.com\/product\/warn-industries-vr-evo-8k-winch\/\" title=\"Warn VR Evo 8K Winch\" rel=\"noopener\" target=\"_blank\"\u003e8k\u003c\/a\u003e, \u003ca href=\"http:\/\/protofab4x4.com\/product\/wrn103252-warn-industries-vr-evo-10k-winch\/\" title=\"Warn VR Evo 10K Winch\" rel=\"noopener\" target=\"_blank\"\u003e10k\u003c\/a\u003e and \u003ca href=\"http:\/\/protofab4x4.com\/product\/wrn103254-warn-industries-vr-evo-12k-winch-msrp-744-99\/\" title=\"Warn VR Evo 12K Winch\" rel=\"noopener\" target=\"_blank\"\u003e12k\u003c\/a\u003e \u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack and the cover above the cable spool will need to be removed for this to fit in this bumper. It is a tight fit, but should definitely fit. These winches have been successfully installed numerous times in this bumper. We recommend relocating the winch pack under the hood to help protect it from the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eOther Winches\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe SmittyBilt Gen2 XRC 9.5 or 12k (The XRC Gen3 will not fit) and SmittyBilt X20 Gen2 have not been tested but based on manufacturer specified height, it is POSSIBLY a suitable fit for this bumper. We cannot guarantee the fit of these products in this bumper so please test fit\u003cem\u003e right away\u003c\/em\u003e in case you need to send anything back.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit \/ The Flat Top (No Bar)","offer_id":50216719548702,"sku":"PF307-BK","price":586.63,"currency_code":"USD","in_stock":false},{"title":"Box Kit \/ The Bull Bar","offer_id":50216719581470,"sku":"PF307-BK-BB","price":632.1,"currency_code":"USD","in_stock":false},{"title":"Box Kit \/ The Pre-Runner Bar","offer_id":50216719614238,"sku":"PF307-BK-PR","price":632.1,"currency_code":"USD","in_stock":false},{"title":"Tack Kit \/ The Flat Top (No Bar)","offer_id":49250708717854,"sku":"PF307-K","price":586.63,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Bull Bar","offer_id":50212839457054,"sku":"PF307-K-BB","price":632.1,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ The Pre-Runner Bar","offer_id":50212839489822,"sku":"PF307-K-PR","price":632.1,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Flat Top (No Bar)","offer_id":49250708783390,"sku":"PF307","price":690.15,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Bull Bar","offer_id":50212839522590,"sku":"PF307-BB","price":743.65,"currency_code":"USD","in_stock":true},{"title":"Fully Welded \/ The Pre-Runner Bar","offer_id":50212839555358,"sku":"PF307-PR","price":743.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Hidden-Winch-Front-Bumper-_-LowPro-_-RockSolid-Series-_PF307_-ProtoFab-10430470.jpg?v=1760482235"},{"product_id":"1966-1977-bronco-rocksolid-non-winch-front-bumper-with-push-bar","title":"1966-1977 Bronco RockSolid Non-Winch Front Bumper with Push Bar (PF309)","description":"\u003cp\u003eThis bumper is made of 3\/16'' Plate steel and is NOT winch ready. (For our winch ready option, see product number \u003ca href=\"http:\/\/protofab4x4.com\/product\/pf300\/\"\u003ePF300\u003c\/a\u003e.) The RockSolid™ bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. The pre-runner style push bar is made from 2\" round tube with 1 1\/4\" side braces. It will add protection and style to the classic RockSolid look.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eThis very durable and modern design has multiple built in tow points or add a set of ‘D’ ring mounts for the ultimate tow points. Easy bolt-on installation with no drilling or welding required. Ships raw steel via truck freight. This product is also available in kit form. The kit edition is not a flat kit and will not be more economical when shipping. It arrives on a pallet; tack welded in its true form and will require several hours welding and grinding to complete.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eA body lift option is available for this product. If you have a body lift, this option will prevent gaps between your bumper, which is mounted to the frame, and your truck body.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Kit","offer_id":49265056088350,"sku":"PF309-K","price":611.51,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49265056121118,"sku":"PF309","price":679.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-RockSolid-Non-Winch-Front-Bumper-with-Push-Bar-_PF309_-ProtoFab-10446298.jpg?v=1760482370"},{"product_id":"1966-1977-bronco-rocksolid-non-winch-flat-top-front-bumper","title":"1966-1977 Bronco Bumper RockSolid Non-Winch Flat Top Front (PF310)","description":"\u003cp\u003eThis early Bronco bumper is made of 3\/16'' Plate steel and is NOT winch ready. (For our winch ready option, see product number \u003ca href=\"https:\/\/protofab4x4.com\/products\/1966-1977-bronco-rocksolid-flat-top-front-bumper\" title=\"PF301\" rel=\"noopener\" target=\"_blank\"\u003ePF301\u003c\/a\u003e.) The RockSolid™ bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003eEasy bolt-on installation with no drilling or welding required. A body lift option is available for this product. If you have a body lift, this option will prevent gaps between your bumper, which is mounted to the frame, and your truck body.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit","offer_id":49250700394782,"sku":"PF310-K","price":500.0,"currency_code":"USD","in_stock":true},{"title":"Welded","offer_id":49250700525854,"sku":"PF310","price":625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-Bumper-RockSolid-Non-Winch-Flat-Top-Front-_PF310_-ProtoFab-10446759.jpg?v=1760482379"},{"product_id":"1966-1977-bronco-rocksolid-lowpro-front-bumper-with-push-bar","title":"1966-1977 Bronco Bumper RockSolid LowPro with Push Bar (PF308)","description":"\u003cp\u003eThis early Bronco bumper is made completely of 3\/16'' Plate steel and is winch ready. The RockSolid™ Bumper design makes it difficult for obstacles to trap. It is designed so that your truck slides upwards and onwards over any obstacle rather than catching. Easy bolt-on installation with no welding or drilling required.\u003c\/p\u003e\n\u003cp\u003eThe bumper's interior is 7.25\" tall and utilizes the standard winch mount bolt pattern of 10 x 4.5. The winches that fit in this bumper are very limited and are a tight fit, but the following we know will fit without issue: Warn M8 and Warn VR Evo*. (The SmittyBilt \u003cstrong\u003eGen2\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eXRC 9.5 or 12k\u003cspan\u003e \u003c\/span\u003eand SmittyBilt X20 Gen2 have not been tested but the manufacturer has confirmed the height and based off that information it\u003cstrong\u003e MIGHT\u003c\/strong\u003e be a suitable fit for this bumper. \u003cstrong\u003e(The XRC Gen3 will not fit) \u003c\/strong\u003eWe cannot guarantee the fit of these products in this bumper so please test fit\u003cem\u003e\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eright away\u003c\/strong\u003e\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ein case you need to send the winch back.)\u003c\/p\u003e\n\u003cp\u003eThis very durable and modern design has multiple built in tow points or add a set of ‘D’ ring mounts for the ultimate tow points. This product is also available in kit form.  A body lift option is available for this product. If you have a body lift, this option will eliminate large gaps between your bumper, (which is mounted to the frame) and your truck body.\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eTack Kit:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eWelded:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003ePush Bar Styles\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eThe Bull Bar\u003c\/strong\u003e: A single low-cut hoop in the center of the bumper made from 2\" 0.120 wall round tubing. \u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003ePre-Runner: \u003c\/strong\u003eA taller center hoop with diagonal kicker tubes extending to the outside edges of the bumper. Made from 2\" 0.120 wall round tubing and 1 1\/4\" side braces.\u003c\/p\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cstrong\u003eAdd Ons\u003c\/strong\u003e\u003c\/h3\u003e\n\u003ch4 class=\"MsoNormal\"\u003eBody Lift\u003c\/h4\u003e\n\u003cp\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location. See our install guide for more information about how it works\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003e\u003cstrong\u003eSuggested Winches\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWarn\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" title=\"Warn M8 Winch\" href=\"https:\/\/protofab4x4.com\/products\/warn-industries-m8-industrial-winch\" target=\"_blank\"\u003eM8\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack will need to be relocated to fit in this bumper. We suggest putting the winch pack under the hood to help keep it protected from the elements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarn VR Evo \u003ca rel=\"noopener\" title=\"Warn VR Evo 8K Winch\" href=\"http:\/\/protofab4x4.com\/product\/warn-industries-vr-evo-8k-winch\/\" target=\"_blank\"\u003e8k\u003c\/a\u003e,\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" title=\"Warn VR Evo 10K Winch\" href=\"http:\/\/protofab4x4.com\/product\/wrn103252-warn-industries-vr-evo-10k-winch\/\" target=\"_blank\"\u003e10k\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" title=\"Warn VR Evo 12K Winch\" href=\"http:\/\/protofab4x4.com\/product\/wrn103254-warn-industries-vr-evo-12k-winch-msrp-744-99\/\" target=\"_blank\"\u003e12k\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote: The winch pack and the cover above the cable spool will need to be removed for this to fit in this bumper. It is a tight fit, but should definitely fit. These winches have been successfully installed numerous times in this bumper. We recommend relocating the winch pack under the hood to help protect it from the elements.\u003c\/p\u003e","brand":"ProtoFab","offers":[{"title":"Tack Kit \/ Bull Bar","offer_id":49282457272606,"sku":"PF308-K-BB","price":640.4,"currency_code":"USD","in_stock":true},{"title":"Tack Kit \/ Pre-Runner","offer_id":49282457338142,"sku":"PF308-K-PR","price":640.4,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Bull Bar","offer_id":49250706293022,"sku":"PF308-BB","price":711.55,"currency_code":"USD","in_stock":true},{"title":"Welded \/ Pre-Runner","offer_id":49250706358558,"sku":"PF308-PR","price":711.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/1966-1977-Bronco-Bumper-RockSolid-LowPro-with-Push-Bar-_PF308_-ProtoFab-10512523.jpg?v=1760482683"},{"product_id":"1966-1977-bronco-rocksolid-centered-single-rack-rear-bumper","title":"66-77 Bronco Centered Spare Tire Rear Bumper | Centered Tire | RockSolid Series (PF303C)","description":"\u003ch2\u003e66-77 Bronco Bumper with lowered centered tire carrier.\u003c\/h2\u003e\n\u003cp\u003eThe 66-77 Bronco Centered Spare Tire Rear Bumper, also called the Centered Tire, is made from 1\/4\" sheet metal and offers the best body protection and style available for your early Bronco. With its easy bolt-on installation that requires no welding or drilling\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*\u003c\/span\u003e, it’s hard to beat. Our RockSolid rear bumpers wrap around the rear corners to provide protection for those precious quarter panels and also have Hi-Lift Jack access holes\u003cspan style=\"color: rgb(43, 0, 255);\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**\u003c\/span\u003e \u003c\/span\u003ecut into the bottom area should you ever need to use one to get yourself out of a tricky situation. \u003c\/p\u003e\n\u003cp\u003eThis bumper includes a unique rack designed to put the tire in the center of the tailgate and then we lowered it for added visibility while still being able to accept up to a 37\" tire with 5.25\" back spacing. Like our other tire rack design, this rack is made of 2\"x3\" x 0.188 wall rectangular tube with beefed up 3\/4\" pivot and heims*** which are rated at 15,850 lbs of static radial load. The heims are permanently lubricated which ensures a smooth and easy hinge to maintain and are easily replaced.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003eIncluded with these rugged is our coveted Cam latch mechanism which is adjustable and offers many years of rattle free use. The rack is also fitted with our new Rack Lockout system which stops the open carrier at a safe location, preventing it from swinging into the side of your truck and also back at you. Lastly, we included a 2” \u003cspan style=\"text-decoration: underline;\"\u003eunrated \u003c\/span\u003ereceiver hitch which is capable of pulling the stock recommended weight for your Bronco\u003cb\u003e.\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e****\u003c\/span\u003e\u003c\/b\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e*This statement applies to our Fully Welded edition. The other editions require several hours of welding and grinding. Additionally, if you order a body lift, you will have a few holes to drill.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e**These are access holes for use of the Hi-Lift jack. We do not currently offer a solution for Hi-Lift jack storage.\u003c\/span\u003e\u003c\/h6\u003e\n\u003ch6 class=\"MsoNormal\"\u003e***On 07\/30\/2023, we began using 3\/4\" Heims on the Centered Swing-out bumpers. The 5\/8 heims are not interchangeable with the 3\/4\" heims. The 5\/8\" heims with the grease zerk are rated at 6,850 lbs of static radial load. The 5\/8\" heims without grease zerk are rated at 11,350 lbs of static radial load.\u003c\/h6\u003e\n\u003ch6\u003e\u003cspan style=\"color: rgb(0, 0, 0);\"\u003e****This statement applies to our 1\/4\" bumper. If you plan on using the receiver to tow, please use your best judgement. Our hitches are unrated but can support the stock towing capacity of a Bronco (we do not claim this on f-series trucks) as our bumper mounting system bolts on the vehicle frame. Small and lightweight single axle trailers are typically safe to tow behind your Bronco. If you tow something that you shouldn't be towing with your Bronco, you could seriously injure yourself or others should something fail. We are not liable for any damage, loss or injury. \u003c\/span\u003e\u003c\/h6\u003e\n\u003ch3\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eEdition\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ctable style=\"height: 196px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 78.4px;\"\u003e\n\u003ctd style=\"height: 78.4px;\"\u003e\n\u003cstrong\u003eBox Kit:\u003c\/strong\u003e Completely disassembled bumper kit shipped in a box. Only recommended for experienced welders\/fabricators as it requires several hours of welding and grinding to complete. The lead time for this product is significantly less. (Typically a 3-4 week lead time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e \u003cstrong\u003eTack Kit: \u003c\/strong\u003eA tack welded kit that arrives in its true form and will require several hours of welding and grinding to complete. It is not a flat kit and will not be more economical when shipping.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 58.8px;\"\u003e\n\u003ctd style=\"height: 58.8px;\"\u003e\n\u003cstrong\u003eWelded: \u003c\/strong\u003eArrives as unfinished raw-steel ready to install. We ALWAYS recommend test fitting the bumper to your truck BEFORE applying paint or powder coat. Once you have successfully mounted the bumper to your truck, it is safe to remove it and apply a finish.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3 class=\"MsoNormal\"\u003e\u003cspan style=\"text-decoration: underline;\"\u003eAdd-On's\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003eBody Lift: \u003c\/strong\u003eAdd an adjustable body lift to your bumper. This system uses pucks to set the bumper at the appropriate location when your truck body is lifted off the frame. See our install guide for more information about how it works.\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cstrong\u003e8-Lug Wheel Plate: \u003c\/strong\u003eIf your Bronco has Super Duty Axles you need to order the appropriate wheel plate. Choose from 8 x 6.5\" or 8 x 170mm.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003ch6 class=\"MsoNormal\"\u003e\u003cbr\u003e\u003c\/h6\u003e","brand":"ProtoFab","offers":[{"title":"Box Kit","offer_id":50216813756702,"sku":"PF303C-BK","price":945.88,"currency_code":"USD","in_stock":false},{"title":"Tack Kit","offer_id":49315491905822,"sku":"PF303C-K","price":945.88,"currency_code":"USD","in_stock":true},{"title":"Fully Welded","offer_id":49315491938590,"sku":"PF303C","price":1118.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0901\/2477\/9806\/files\/66-77-Bronco-Centered-Spare-Tire-Rear-Bumper-_-Centered-Tire-_-RockSolid-Series-_PF303C_-ProtoFab-10535027.jpg?v=1760482779"}],"url":"https:\/\/www.protofab4x4.com\/collections\/1966-77-bronco-bumpers.oembed","provider":"ProtoFab","version":"1.0","type":"link"}